Modellkits

A statue of Kali, Goddess of Death, stands guard over countless treasure. Woe to any sailor who tries to steal from the horde guarded by this stone sentry. Her six arms all wield swords and can fight off multiple attackers. One of Ray Harryhausen's more ambitious stop-motion creations, Kali would move all her arms as she battles the adventurers.** This is a model kit which is required glue assembly and painting. The images shown are reference only.

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 2 x LR60 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

"Combat preparation complete. Start your engines.The next advancement in ""man-machine oneness""... Ver. 2.0 of PAWN A1 is now available with custom heavy-duty armor! The features that allow users to board Governors onto HEXA GEAR machines as their avatars have been retained while greatly improving the mobility and design of the model as a stand-alone figure! Head parts designed to resemble a fearless soldier are also included, and are recommended to be used as a base model for custom Governors.Model Specifications:- The model stands 74mm tall and features 47 points of articulation.- Includes three types of heads, each with corresponding eye decals.- The wrists have stable 2mm joints and the inner thighs have joints specially designed for riding HEXA GEAR, allowing for the model to become one with the HEXA GEAR while maintaining its human form.- The included chain and rifle can be combined to create a bayonet.- The cable connecting the HEXA G-R.A.M storage tank with the railgun is made of a lead wire that can be bent freely, allowing for various action poses.- The back railgun and sensor unit can be equipped on either the left or right side.- The model is equipped with a connector on the back piece, which allows users to attach a HEXA G-R.A.M System and a variety of parts.- The color scheme of this model is comprised of four colors: Hexa black, light gray, dark gray, and flesh.Included Items:- 1 x Model - 1 x Character Design Head - 1 x Inner Cap Head - 1 x Special Eye Decals Sheet- 1 x Railgun - 1 x HEXA G-R.A.M Storage - 1 x Sensor Unit - 1 x New Assault Rifle - 1 x Chain Blade Unit - 1 x Chain Blade Grip - 1 x Chain Blade 3mm Adapter - 1 x PVC Hand Parts (6 Different Expressions) Right and Left Each- 1 x PVC HEXA G-R.A.M

"From Humikane Shimada's SHIMADA HUMIKANE ART WORKS II and KASEI SEIBUTSU KYOKU comes a model of the new character, agent Artynia!This model is a heavy-duty version of Arsia with more firepower.Model Specifications:- Includes a newly sculpted long-range rifle, large sword, and movable binder designed by Humikane Shimada.- The large sword comes with two scabbards, one for storage and one for unsheathing.- The movable binder is able to hold weapons as well as be customized with other parts.- Includes three new faces: default, injured, and shouting.- The face parts are pre-painted, allowing users to build a model that closely resembles the character illustration.- This model can be assembled with or without the included hat.- The HUD goggles and mask are interchangeable.- Includes her mechanical right arm and clothed left arm, and their respective hands. Includes both left and right mechanical and clothed arms, allowing her to have both mechanical or clothed arms.- The length of the long-range rifle and gunstock can be changed by swapping parts.- Features a working scabbard that allows her sword to be sheathed or unsheathed.- Her side armor is freely movable so as not to hinder the range of motion of her legs.- The arms, legs, head, face, and other parts are partially compatible with the Frame Arms Girl series.- The kit includes decals for the eyes and other markings.- The 3mm connection points in the back, waist, and calves allow for the use of parts from the existing M.S.G series and Frame Arms series."Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"The ARMORED CORE V Variable Infinity series finally kicks into gear!Making its much-awaited debut from the PlayStation® 3 and Xbox 360® game ARMORED CORE V, AGNI features precise detailing that gives the kit a suitable weightiness. The model can equip four massive weapons on either its hands or shoulders. Each weapon has two modes: the HARICOT SC61 Sniper Cannon turns into the ERBSEN SC62 and the KO-2H6/STREKOZA Battle Rifle turns into the KO-2H4/PODENKA.In addition, by swapping parts it is possible to change the leg size between the ULG-11 RAINIER medium legs and the ULG-10/L light legs.The arms can also be changed between the UAM-10/R and UAM-10/L by swapping the shoulders and forearms.The firing position taken when shooting the sniper cannon can also be recreated.At the same 1/72 scale as many military models, this kit is perfect for displaying with military model kits such as tanks.A dedicated display base is also included that allows for stable posing even when equipped with large weapons.*The parts in this kit are only compatible with other models in the ARMORED CORE V Variable Infinity series.(This item is a reproduction.)"

"From ARMORED CORE for Answer, GA's best NEXT, FEEDBACK, joins the fray.The model features a color exclusive to Feedback that further highlights its solid and sturdy design.The old-fashioned bazooka arms and leg stabilizers, characteristic of this AC, are also redesigned and included.This kit further widens the range of assembly options available in the AC V.I. series.The kit can be enjoyed on its own, but when combined with the V.I. series, users can create their own Armored Cores.(This item is a reproduction.)"

"From the 1993 film Patlabor 2: The Movie comes the JGSDF attack helicopter Hellhound.Kotobukiya has brought to life the helicopter with its trend-setting design and futuristic look in an accessible and easily customizable kit.Its experimental design with distinctive wing tips pointing down and counterweight nozzle on the tail in place of a rotor has been faithfully recreated.The model also features an array of incredibly fun details, such as the two pilots sitting in the cockpit and distinctive wings that can actually fold in for storage.Pick up and enjoy everything this kit has to offer!·Includes water slide decals.·Includes a Flying Base with tampography printed logo.(This item is a reproduction.)"

"Combat preparation complete. Start your engines.Model Information:""My blade shall protect SANAT...""QUEEN'S GUARD is a color variant of IGNITE SPARTAN that has been dyed in the same crimson red as AGNIRAGE.This special Ignite Spartan, directly developed by SANAT, features various unique pieces of equipment only provided to a specific unit independent of Valiant Force: protectors of SANAT and the Queen's Guard.While MSG and Valiant Force units are commonly operated by agents, these invaluable pawns are directly operated by SANAT. Unlike EXPANDERs and HIDESTORMs that operate in various areas and terrain, these guards are deployed near Generator Shafts to keep a close watch on the area. While the inner workings of the unit are kept under wraps, the front-line forces are formed of VOLTREX WRATH and SIEG SPRINGER-mounted Queen's Guards. Additionally, as a number of Queen's Guards have been seen riding the Agnirages that provide air support for the Generator Shafts, it has been speculated that the information entity that controls Expanders can freely move between them and the Queen's Guard.The design of the actual unit is nearly identical to that of the Ignite Spartan aside from a streamlined head to accommodate flying HEXA GEAR. The universal arm on its back allows for the equipping of a large Criminal Buster that is intended for use while riding HEXA GEAR, rather than close combat.The Jack Blade made of red stelacry functions similarly to Hidestorm's VIC Blade and has the capabilities to forcibly stop targets in their tracks. The large shield is fitted with a SANAT crest protected by stelacry in the same red color and functions as an advanced external computing device.The equipment of the Queen's Guards is highly classified even within MSG, and the Guards themselves ensure that any wreckage disposed of on the battlefield is entirely unrecoverable.They are only known by the name Queen's Guard.They are the Queen's Guard and the Queen's Guard are them.Weapons:- Criminal Buster (Large Launcher)- Jack Blade- Beyond (Shield)- Universal ArmModel Specifications: - This model is a variation kit with a new design incorporating parts from IGNITE SPARTAN. A hybrid model with joint structures from other models, such as WARMAGE, with a hip joint that can hold larger weapons, neck joints that can articulate front and back, and axial joint structures for the ankle.- The universal arm on the back has 8 points of articulation on either side to create various poses.- The large cannon ""Criminal Buster"" can be folded in the center. Its grip is designed with an adjustable hilt and ball joint, making it easier to play with.- The barrel of the Criminal Buster can be equipped with an attachment for a flying base, allowing wider displaying opportunities in more acrobatic poses.- The large shield ""Beyond"" is engraved with the ""SANAT"" emblem and boasts an outstanding presence.- The Jack Blade can be placed beautifully using the newly sculpted sword-holding hand.- The Jack Blade is made in clear red and can be attached to 3mm connection points such as the hard points on the thighs.- Various parts can be equipped by attaching the shield mount to the forearm.- The color scheme of this model is red, dark gray, black, and clear red.Included Items:- QUEEN'S GUARD Model ×1- 4 Types of Hand Parts × Left and Right Each- Criminal Buster ×1- Beyond ×1- Jack Blade ×1- Universal Arm ×1- Shield Mount Attachment ×2- PVC HEXA G-R.A.M. ×1- Archive Card ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

Model Specifications:- This model kit is an exclusive variation kit from SIEG SPRINGER that features a different color scheme for the armor and includes some newly designed parts.- There are two horns to choose from: a blazing horn (clear orange version) and a ram horn (red version).- It comes with a special black flying base printed with the ""SANAT"" crest, and the optional supporting prop can be used to display the model in various ways.- By swapping out the head unit and step unit, a Governor can be mounted in front like a centaur.- The tail unit is flexible so the model can be transformed into Sprinter Mode by attaching the included effect parts. - Includes original effect parts that can be attached to the tail unit.- The model has a deployable hard point on the abdomen where various armor parts can be attached to make an original customized model.- Two types of the humerus units of the forefoot are included: one designed to be more aesthetic and the other more customizable. - The head sensor is pre-painted, allowing you to build the model close to the finished image just by assembling.- The color scheme of this model is red, gunmetal, and clear.*The red is the same color as AGNIRAGE and some other models, and the gunmetal is the frame color commonly used within the HEXA GEAR series.Included Items:- 1 x SIEG SPRINGER- 1 x Step Unit - 2 x Boost Effect Parts - 2 x Original Effect Parts - 1 x Ram Horn - 1 x Forefoot Customization Parts (left and right) - 2 x 3mm Joint Parts - 1 x Black Flying Base with the SANAT Crest - 1 x Archive Card Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Combat preparation complete. Start your engines.Model Information:ABYSS CRAWLER is a third-gen HEXA GEAR developed by the Liberty Alliance.It was developed to explore and control blocked terrain such as culverts. Unlike other third-gen HEXA GEAR, it has two Zoatex modes and is characterized by its continuous use of Zoatex.At the beginning of the war, cities were raided by unmanned HEXA GEAR called HIDESTORMs. Further investigations uncovered numerous ginormous underground tunnels and facilities from the past that were used to carry out these attacks. As such, the Liberty Alliance urgently required a full-scale survey. However, all information about the geological patterns of these underground structures barring simple outlines, was lost, and to make matters worse, the areas had already fallen into enemy hands, with MSG Valiant Force HEXA GEARS and droids roaming the tunnels.Hidestorms, with their capabilities in electronic warfare thanks to their VIC Blades and other weapons, greatly threatened the Liberty Alliance's coordination from underground by exposing communication lines, repeaters, and power lines that connected the cities. Liberty Alliance realized the need to take back the underground tunnels and hastily developed a HEXA GEAR unit with the express purpose of taking on the task.In developing the unit, the wreckage of the destroyed Hidestorm was recovered and its frame was repurposed and reused. However, as there was little prospect of reproducing the capabilities of the VIC Blade, or controlling or disabling it, the next best countermeasure was taken. The result was the creation of the Invasion Counter Shield, commonly known as ICS, equipped on the left arm of every unit. Due to a chronic shortage of parts, only a small number of these units were produced and subsequently sent into the darkness of the underground tunnels in squads. There were countless heavily contaminated underground areas due to the use of crystalline reactors categorized as Level 6 - Abyss, where even the worst of areas of the surface could hardly hold a candle to them. Abyss Crawlers waded through the sludge and grime, sometimes engaging with Hidestorms, small droids, and other unseen battles.Weapons:- ICS (Invasion Counter Shield)- Biting Scissors- Flame Thrower- Blast Recon- Head AnchorModel Specifications: - The model and armor parts are of a black coloration similar to LORD IMPULSE and BULKARMß "LUMBERJACK" making it easy to assemble without painting.- The model system can convert between "Formation 1" which emphasizes combat, and "Formation 2," which emphasizes mobility.- The effect parts for the ICS equipped to the Biting Scissors on the left arm are detachable.- The ICS effect parts are made of clear orange plastic, giving the model a unique and realistic appearance.- The Biting Scissors on the left arm can be opened and closed to create a variety of battle poses.- The secondary "Head Anchor" can be displayed in a variety of configurations.- The roll bars on the skid units on the legs can be opened and closed.- A separately sold Governor unit can be boarded onto the cockpit.Included Items: - Head Anchor Effect Part ×1- Wire ×1- Biting Scissors ICS Effect Part ×1*The biting scissors effect part can be placed on either the left or right arm.- Archive Card ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Combat preparation complete. Start your engines.Model Information:The PARA-PAWN JUDGE HEAD is an improved design on the SENTINEL. Unlike the IGNITE, which is awarded along with a title only to those who have achieved success in battle, the Para-Pawn Judge Head is provided purely for enhancement purposes.As with the Para-Pawn Sentinel, which was copied from the first armor type developed by Liberty Alliance, PAWN, the Judge Head is also based on a previous machine, ARMOR TYPE: KNIGHT. Unlike the unit it is based on, however, the Judge Head operates as heavy infantry rather than cavalry.The Judge Head features harder armor than previous units as well as reinforced artificial muscles, giving it a substantial difference in physical strength alone over the Sentinel. However, as a downside of the improved defensive capabilities, the unit also bears an increased weight, resulting in a slight decline in mobility. Nevertheless, it is overall still a well-balanced, capable machine.The head sensor is a development of the Sentinel and it excels in weapon accuracy, however, its real offensive and defensive capabilities are demonstrated in close-quarters combat. To increase versatility, the manipulators are the same as the Sentinel but with significantly stronger joints and grip strength, giving it improved control of melee weapons over the Sentinel.The Judge Head's strength is so exceptional that a direct punch to a HEXA GEAR would rarely result in damage to the unit itself.The unit's primary weapon is The Ruler, a giant axe equipped with a HEXA G-R.A.M and dual jets. With Judge Head's powerful grip, a single propelled swing of the axe can smash through standard armor types and Para-Pawn armor with ease.Similar to the Ignite, the design of the Judge Head also takes into account the impression it makes on the public. Thus, historical texts were referenced to give it a fearless appearance in the style of medieval European armor.However, the way the unit cuts down its enemies one after the other is more akin to an executioner at the execution block, as if it is making an example of those who rebel against SANAT.Weapons:- The Ruler (Large Axe)- Mount ArmModel Specifications:- This product is a variation kit of GOVERNOR ARMOR TYPE: KNIGHT.The head, additional chest armor, large shoulder armor, and large axe are all newly designed.- Left and right parts are included for both the additional chest armor and large shoulder armor, so they can be equipped at the same time.- The main body color is the same as GOVERNOR PARA-PAWN SENTINEL.Included Items:- JUDGE HEAD Model ×1- Hand Parts (Closed, Open, Weapon Holding) × Left and Right Each- The Ruler (Large Axe) ×1- Mount Arm ×1- PVC HEXA G-R.A.M. ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"ARMORED CORE WEAPON UNIT 018, Large Grenade Cannon: OIGAMI, is a giant, articulated grenade launcher that can connect with the weapon slots on both sides of an AC's back.This grenade cannon measures a whopping 400mm in length, making it one of the largest weapon units in the ARMORED CORE WEAPON UNIT series.The cannon can move from stored mode to firing mode without replacing any parts. Even when folded, it's so large that it almost hides the AC itself.*As this is one of the largest kits in the AC Weapon Unit series, it is packed in a lidded box.(This item is a reproduction.)"

Entering a new generation of the V.I. series!The overwhelming volume and evolution of the ARMORED CORE plastic kit series arrives at MIRAGE C04-ATLAS FOXEYE Ver., from LAST RAVEN and NEXUS and instantly recognizable to any fan of LAST RAVEN.In LAST RAVEN, Vertex does battle with The Alliance. The Vertex forces are led by a charismatic Raven, and while he has passed his peak as a Raven, he still has the highest bounty on his head.Equipped with the weapon voted most popular in the game, the WH04HL-KRSW, as standard issue, this AC also features missile pods on both shoulders, an openable back booster, and all-new innovative shoulder and leg articulation!The use of poly caps allows for a wide range of motion and the multi-colored (including clear) runners allow users to assemble a model faithful to the original game's design right out of the box.The kit is compatible with other existing ACs and NEXTs from the V.I. series, allowing users to swap out parts.

Max Factory's Asuka Shikinami Langley figure is back in PLAMAX form!From "Evangelion: 2.0 You Can (Not) Advance" comes a PLAMAX plastic model of Asuka Shikinami Langley, the "Second Child" and pilot of EVA Unit 02.Originally released as a PVC scale figure in 2011, each part of the original figure has been scanned individually in order to recreate the figure in plastic model form. This snap-fit plastic model kit retains the appeal of the original figure with perfectly preserved modelling. The kit can be easily assembled by anyone.The kit includes pad-printed face plates and colored runners, making for an easy-to-assemble kit. The design of the model has been carefully planned to preserve the detail of the original sculpt in plastic model form. We hope you enjoy assembling it for yourself!*Plastic model tools and adhesive are required for assembly.*Adhesives can be used for more complete, secure assembly.*Use paint appropriate for plastic models when painting.

Max Factory's Mari Makinami Illustrious figure is back in PLAMAX form!From "Evangelion: 2.0 You Can (Not) Advance" comes a PLAMAX plastic model of Mari Makinami Illustrious in her new-type plugsuit. Originally released as a PVC scale figure in 2011, each part of the original figure has been scanned individually in order to recreate the figure in plastic model form. This snap-fit plastic model kit retains the appeal of the original figure with perfectly preserved modelling.The kit includes pad-printed face plates and colored runners, making for an easy-to-assemble kit. The design of the model has been carefully planned to preserve the detail of the original sculpt in plastic model form. We hope you enjoy assembling it for yourself!*Plastic model tools and adhesive are required for assembly.*Adhesives can be used for more complete, secure assembly.*Use paint appropriate for plastic models when painting.

A dark elf joins the Guilty Princess lineup!From the "Guilty Princess" plastic model series by Tony x Max Factory comes Dark Fairy Knight Grimlinde!- The model is based on designs by Tony and created by Max Factory.- This model kit makes use of snap-fit connections for easy assembly.- Four pre-painted face plates including a smiling face, a grinning face, a crying face and a closed-eyes face are included.- Accessories include "Magic Flute Spear Gjallarhorn", "Magic Instrument Exophone" and various transformable weapons.- Also includes interchangeable parts for displaying in "Dark Knight Mode", "Marching Mode" and "Dark Priest Mode".- Weapons can be combined with those of PLAMAX GP-08 Fairy Knight Princess Elfina to form "Sacred Demon Combined Ballista Tempest Buster".- Hand parts are made with flexible PVC.- Includes an unpainted face plate and eye decals.- An articulated stand is included to display the model in a variety of poses.

"RED FIVE, blast off!"RED FIVE, the personal AHSMB unit piloted by Izuru Hitachi, from the anime "Majestic Prince" is joining the MODEROID lineup!- The model stands at approx. 150mm in height and its joints are fully articulated.- The mecha's Full Burst Mode can be recreated by using the included interchangeable parts.- Includes 2 Arm Sword Counters, a Beam Cannon, and a HEP cannon.- The HEP cannon can be transformed into the mine launcher, chainsaw and railgun forms using included interchangeable parts.- Includes a display stand for flight and standing poses.- The various parts of the mecha have been separated into different colored runners and pre-painted parts, and the model kit also comes with stickers, making it easy to recreate the mecha from the series with a simple assembly.*This product does not stand on its own. Please use the included stand to display.

Your Pokémon will make a splash with the Aquatic Adventure building set. Turn the crank to see Finneon and Squirtle swim, while Psyduck watches from the shore. Combine with other Adventure Builder sets to create an expanded Pokémon world with motion; each sold separately.- Building set featuring the Motion Brick: turn the crank to activate the Pokémon's movement- Includes 3 buildable Pokémon: Squirtle, Psyduck, and Finneon- Pieces combine with all Pokémon building sets by MEGA and are compatible with other name brands- Ideal for ages 6 and up, these building toys help develop creativity and problem-solving skills- Officially licensed by The Pokémon Company InternationalNote: Packaging illustrations serve only as examples and may differ from the actual packaging in terms of design or language variant.

- MEGA construction set - Ages: 13+- Pieces: 323Note: Packaging illustrations serve only as examples and may differ from the actual packaging in terms of design or language variant.

GraviTrax has the right action pack for every level and age.GraviTrax CORE, PRO or POWER? Preferably all three, of course. But one thing at a time. First of all, we would like to introduce the three different GraviTrax lines here and answer the most frequently asked questions: Which GraviTrax products are suitable for beginners? What is the difference between GraviTrax PRO and POWER? From what age can you start having fun with GraviTrax?But back to the beginning: With GraviTrax, everything starts with - how could it be otherwise - the start. To be more precise: with a starter set. Here, you or your child, godchild, grandchild, niece or whoever else comes along, can choose from several cool starter sets from the different product lines.From here on, there is no order, rules or restrictions. You can creatively combine all GraviTrax extensions, building blocks and elements from all lines to your heart's content. Nevertheless, there are of course differences between the individual lines GraviTrax PRO, GraviTrax POWER and GraviTrax CORE.

A Nendoroid of the official character of the 2023 Hatsune Miku GT Project!The official character of the 2023 Hatsune Miku GT Project, Racing Miku 2023 Ver., is now a PLAMATEA plastic model!- The model stands at about 155mm in height and the model's joints are articulated for easy posing.- Illustrator toridamono's design has been faithfully captured in plastic model form.- Miku's cape is made with a soft material.- Interchangeable hand parts and flag included.- A pre-painted smiling face plate and face plate that can be customized with decals are included.- Eye decals and water-slide logo decals are inlcuded.- The various parts of model have been separated into different colored runners and pre-painted parts, making it easy to recreate the character with a simple assembly.- Articulated stand included.