Les répliques

- Officially licensed diecast model with figure from `Street Fighter´- Jada Toys- Scale: 1/24- Packaging: Window box

- Officially licensed diecast model with figure from `Looney Tunes´- Jada Toys- Scale: 1/24- Packaging: Window box

- Officially licensed diecast model with figure from `Aggretsuko´- Jada Toys- Scale: 1/24- Packaging: Window box

The XCV-330 is one of the missing links in the Enterprise's design lineage. The ship was first seen in illustrated form in STAR TREK: THE MOTION PICTURE when Decker is giving Ilia a tour of the ship. A model of it later appeared in the Kelvin Timeline in STAR TREK INTO DARKNESS. The ship is based on one of Matt Jefferies' early rejected designs for the Enterprise. The model measures 8.25" (21 cm) long.

At the end of STAR TREK: DISCOVERY's second season, the crew goes up against a fleet of Section 31 ships. Each of those ships launches dozens of remote-control, drone fighters that are docked in an outer framework around the hull. All the Section 31 ships were designed by Ryan Dening, who originally intended to give them pilots. This model of the fighter is just over 6" (15.5 cm) long.

Eaglemoss's final shuttle set focused on alien shuttlecraft. It includes the Vulcan shuttle from 'Fallen Hero', the Xindi shuttle from 'Azati Prime', the Klingon Toron-class shuttle from 'Gambit', and the Ferengi shuttle, one of which Quark famously acquired in 'Little Green Men'. Each shuttle is approximately 3" (8 cm) long.

It has been eight years since Batman™ vanished into the night, turning, in that instant, from hero to fugitive. Assuming the blame for the death of D.A. Harvey Dent, the Dark Knight™ sacrificed everything for what he and Commissioner Gordon™ both hoped was the greater good. For a time the lie worked, as criminal activity in Gotham City™ was crushed under the weight of the anti-crime Dent Act. But everything will change with the arrival of a cunning cat burglar with a mysterious agenda. Far more dangerous, however, is the emergence of Bane™, a masked terrorist whose ruthless plans for Gotham drive Bruce out of his self-imposed exile. But even if he dons the cape and cowl again, Batman may be no match for Bane.

Dark Horse Comics, in partnership with Netflix, are proud to announce our first highly detailed ship replica of the Imperium Dropship for Zack Snyder's science-fantasy epic, Rebel Moon. Emphasizing the extensive world-building elements of Rebel Moon, the massive scale of the universe is represented by the near-endless variety of ships that navigate the stars. The Imperium Dropship Replica is hand painted with exceptional quality and made out of poly resin with metallic parts. Held aloft with a metal rod upon a base emblazoned with the Rebel Moon logo, this ship replica measures approximately at 6.75" long,3.75" wide, and 4" tall.

"The King is dead, long live the King." Eredin, The Witcher 3 : Wild Hunt.PureArts welcomes a dark foe to our midst: main antagonist from The Witcher 3: Wild Hunt, Eredin Bréacc Glas. This skull-shaped helmet of the King of the Wild Hunt inspires dread and fear in all who behold it!We've ventured to recreate this fearsome helmet down to every minute detail. Featuring a removable skull-shaped face plate, the highly detailed Eredin Helmet Replica rests atop a base shaped like Eredin's own sword hilt. The Witcher 3: Wild Hunt Eredin 1/1 Scale Helmet Replica is the perfect display piece for fans of The Witcher!- Dimensions: 41 x 39 x 44 cm- Materials: PolyresinLimited to 850 pieces.

"Welcome to Jurassic Park!" Share John Hammond's love for the park with this 30th anniversary, limited edition replica egg and cane set. Measuring 12 cm high, this Replica Egg has a stone effect finish and features the iconic Jurassic Park logo. Paired with the egg, is a miniature replica of John Hammond's famous cane measuring 18.9 cm tall! Used to genetically replicate the dinosaurs, this cane is finished with the mosquito in amber and includes a display stand within its presentation box. In celebration of the films release, this Replica Set is limited to 1993 worldwide with each box being individually numbered.

Don't miss your chance to add this beautifully sculpted Lord of the Rings tribute to your collection!- Dimensions: 30 x 30 x 46 cm- Materials: PolyresinLimited to 1500 pieces.Requires 3x AA batteries (not included)

- Officially licensed diecast model with figure from `Teenage Mutant Ninja Turtles´- Jada Toys- Scale: 1/24- Packaging: Window box

Live And Let Die is the only James Bond film to feature a supernatural theme and was also the first major motion picture to feature tarot card reading as a central plot device.The producers were keen to avoid any of the typical occult stereotypes that were frequently seen in films of the period that featured tarot. So Scottish artist Fergus Hall was commissioned to paint unique art as the centerpieces for Solitaire's iconic cards.A traditional tarot card deck contains 78 cards, however the compressed tight deadlines of film production meant that only 27 different paintings, therefore only 27 different prop cards, could be completed in time.A licensed deck of 78 Tarot Cards was made available in stores when Live And Let Die premiered in theaters. This same deck was later re-branded as 'The Tarot of the Witches' and remains popular with tarot practitioners and enthusiasts to this day. However, both these decks feature significantly revised and edited artwork that was produced after filming had been completed and does not match what was seen in the film. The Factory Entertainment team meticulously digitally restored high-resolution scans of the original prop cards in the EON Productions archive.This set replicates exactly the 27 cards used in production, including two recently rediscovered cards which were thought to have been lost and have never been previously reproduced. The set also includes 10 duplicate 'The Lovers' cards, making a total of 37 cards in each set.Each card is printed on heavyweight playing card-stock and features a stylized 007 motif pattern on the reverse. Presented in a stylish gift box, with a magnetic closure. Each set includes an individually numbered COA booklet and a screen-accurate black velvet storage bag.Gift Box Dimensions: 10.6 x 5.7 x 1.4" (270 x 145 x 35 mm)Individual Card Dimensions: 4.3 x 2.8" (108 x 70 mm)

Measuring just over 4" tall, this illuminating Diamond Ore replica is the perfect size for any space in your home, office or wherever you play. The block is powered by 3 AAA batteries and the touch-activated LED features three different modes-a gentle, flickering pulse, steady illumination, and off.

This touch-activated Minecraft Torch replica features a flickering LED to keep hostile mobs out of your bedroom, game room or office. Measuring 10" tall x 2.125" square, the torch's hinged base means it can stand alone on a desk or table or hang from a wall (mounting screws and drywall anchors included) with no additional crafting required. Powered by 3 AAA batteries (not included).

You don't have to mine any resources or set up a brewing stand to craft this potion bottle. Measuring 6.5" tall, this collector replica's texture is inspired by frosted glass and is topped with real cork. With a tap, you can change the potion colour! The bottle cycles through blue, red, yellow, green, and purple light, powered by the 3 AAA batteries (not included).

- Officially licensed diecast model with 7 cm figure from`Teenage Mutant Ninja Turtles´- Jada Toys- Scale: 1/24- Packaging: Window box

- Officially licensed diecast model from `Back to the Future 3´- Jada Toys- Scale: 1/24- Packaging: Window box

- Officially licensed diecast model with 7 cm figure from`Wednesday´- Jada Toys- Scale: 1/24- Packaging: Window box

- Officially licensed diecast model from `Back to the Future 3´- Jada Toys- Scale: 1/32 - Packaging: Window box

- Officially licensed diecast model from `Back to the Future´- Jada Toys- Scale: 1/32 - Packaging: Window box

This gold-plated metal replica of the One Ring comes with a 60 cm chain in a gift box. It is available in size 10 (Ø 20,0 mm) only.

- Officially licensed diecast model with 7 cm figure from `Batman´- Jada Toys- Scale: 1/24 - Packaging: Window box

To the movie 'James Bond' comes this faithful replica. The mini replica was made of metal and is 6 cm tall.Factory Entertainment is here to help expand the pop-culture collecting experience with its Scaled Prop Replica line. All Scaled Prop Replicas are available at an entry-level, affordable price while not skimping on the fine details that collectors have come to expect from Factory Entertainment's full scale replicas. Collect them all!

Sovereign was a sentient Reaper and the flagship of Saren Arterius, a rogue Spectre. The gigantic ship was such a powerful artificial intelligence that the geth worshipped it as a god. Though Commander Shepard and their crew destroyed Sovereign, the ship was only the first step of the Reapers' larger invasion of the galaxy.Our highly detailed Reaper Sovereign replica captures the essence of the powerful Reaper ship in a free-standing 8 inch tall PVC statue. Add it to your collection today!

The Wand Company's range of die-cast Poké Ball Replicas are the first officially-licensed premium collectible replicas for Pokémon fans. This premium quality, gorgeously accurate Net Ball replica is made with an engineered metal shell, has a beautifully colored surface that is sensitive to touch and proximity, and features a brightly illuminated button and lift-to-display illuminated presentation case. This Net Ball promises to be a wonderful addition to any Pokémon collection! Ideal for collectors, the replica comes with a presentation case - authenticated by a uniquely numbered hologram - and a polished stainless-steel ring, so that you can display your Net Ball however you want. Enjoy multi-colored lights glowing under the Net Ball when you open the case; control them by touching the case's metal plaque. Product Features:- Highly accurate, electronic, display-grade replica with a finely detailed metal shell and a premium painted finish- Lovingly brought to life with proximity-sensing technology- Motion sensor activated multicolor button that changes light color or starts a Pokémon-catching illumination sequence- Opening presentation case lifts and illuminates the Net Ball for display- Uniquely-numbered collectible- Officially licensed by The Pokémon Company International- Size: 9 x 10 x 10 cmWhat's in the box:- Die-Cast Net Ball Replica- Matte black presentation display case with polished Poké Ball icon on the lid- Highly polished stainless steel display ring- Illustrated manual- Batteries included

The Bat-Raptor is a state-of-the-art, three-wheeled, open-air roadster built by the Dark Knight himself. Powered by a mighty engine, this trike is able to make massive leaps, scale brutal terrain, and chase down the most evasive criminals.- BATMAN and BAT-RAPTOR are based on their looks in DC comics- Incredibly detailed 7" scale figure and vehicle based on the DC MULTIVERSE- Designed with Ultra Articulation with up to 22 moving parts for full range of posing and play

Officially licensed. With coconut.- Size: 17 x 32 x 3 cm

NECA's DC Prop Replica line expands to include items from the beloved 1966 Batman television series. This campy classic TV show brought the adventures of the dynamic duo to life with puns galore and plenty of Bat-Gadgets. Get your own screen-accurate replica of the Bat-Radio, complete with extendable antennae and a light-up front panel activated by a front push button. Measures 5 inches tall; batteries included. No sound features, battery is for light-up feature. Closed box packaging.

"I've done far worse than kill you. I've hurt you. And I wish to go on hurting you. I shall leave you as you left me, as you left her; marooned for all eternity in the center of a dead planet..." - KhanKhan's distinctive necklace as featured in Star Trek II: The Wrath Of Khan, is the latest prop replica in our continued range of high-end collectibles from Star Trek.There were several versions of the prop necklace used during filming, each with subtle variations and featuring real-world components. Our team studied the surviving original props, along with reference in the Paramount Pictures archives. We then painstakingly identified each of the components used and carefully duplicated them.Due to the rarity and, in some cases, the fragility of actual vintage electrical components, these parts were recreated in solid metal. Each replica features real electrical wire of the correct gauge and color. All parts were then hand-stitched to an imitation-suede band, exactly like the original props.The replica duplicates the necklace as seen for most of the film, in an undamaged state, prior to the battle damage it sustained in the Mutara Nebula.Packaged in a magnetic flap gift box and accompanied by a numbered COA booklet, the edition size for this replica is 1,864 pieces as an homage to the registry number of the iconic U.S.S. Reliant.