Kotobukiya

From the robot anime LINEBARRELS OF IRON comes a model kit of Vardant, the Machina piloted by JUDA's ultimate Factor, Reiji Moritsugu! - This model is a fully articulated action model kit. - The Variable Binders on the back can be displayed in an open state by replacing parts. - By replacing parts, the blades stored inside the Binders can be wielded. - Includes two weapon-holding hands (left/right), allowing for single-use or dual-wielding like in the anime. - Includes open hands (left/right). - Includes a display base. (This item is a reproduction.)

"Cuteness explosion!This time the cute ribbons come in a beautiful clear blue color!This set comes with a giant ribbon that can be attached in various configurations and numerous smaller ribbons that can be used wherever you like.The wide variety of parts in the set allows for your character kits to be transformed into idols, dancers, angels, and more! Additionally, since the color perfectly matches the simultaneously released Megami Device AUV AME NO UZUME SUNSHINE, she can be transformed into an even more gorgeous character by equipping her with an obi or fins!Product Specifications: - The giant ribbon consists of three sections: the loops, knot, and tails. The middle knot comes in three types: regular, with an extension joint, and with a 3mm connection point, allowing for combinations for any situation. - The loop and tail parts are articulated, allowing for a variety of angles and poses. - Three types of tails (A, B, and C) are included to give the ribbon a completely different silhouette.- The tail parts can be used with ring joints for even more combinations, such as wrapping ribbons around the ankles and wrists.Included Parts: - Loop Parts: Left/Right- Knot Parts ×3 Types- Tail A: Left/Right- Tail B: Left/Right- Tail C: Left/Right- 9 x Articulated 3mm Joint - 6 x Large Ring Joint - 6 x Medium Ring Joint - 6 x Small Ring Joint - 2 x Small 3mm Joint Ribbon - 2 x Medium 3mm Joint Ribbon - 2 x Large 3mm Joint Ribbon - 2 x Arm Ring Ribbon

"BLACK SARENA, the jet-black robot Akito Tenkawa pilots in his quest for revenge in the 1998 film Martian Successor Nadesico: The Motion Picture - Prince of Darkness.- At the core of the heavy black armor is Akito's custom Aestivalis, which has been continually repaired and improved. By swapping out parts, the model can transform from the Black Sarena to Akito's custom Aestivalis. - This highly versatile model even lets users recreate the climactic scene of the film where only the leg armor remains.- The kit also includes a special base.

"Introducing the TAMOTU Type-S!The upgraded TAMOTU Type-S comes in a new color inspired by Kotobukiya's signature green!MARUTTOYS is a world of original robot characters created by up-and-coming model designer MiZ (Kouki Mizuno).TAMOTU, the artist collaboration item between Kotobukiya and MARUTTOYS, is upgraded into TAMOTU Type-S and released as a plastic model in colors exclusive to the KOTOBUKIYA SHOP and official international distributors!Setting: - TAMOTU Type-S is an upgraded security model of the TAMOTU robot.- The front and sides have additional armor, and the head is equipped with an additional sensor unit.- On its back are two drones and paintball guns. By working with the drones, this model is able to efficiently patrol buildings.- The guns can fire pellets filled with viscous paint that are able to blind cameras and slow down robots when fired at their joints.- This green model was produced in limited quantities as a security robot for a certain hobby manufacturer.Model Specifications:- This model is a full action model kit with 26 points of articulation.- Can transform from the mobile "Normal Mode" to "Work Mode," in which the back and legs can be deployed.- TAMOTU is built with a complete inner frame. All outer parts can be detached from it.- The two paintball guns on the back are removable. The guns can also be used with Frame Arms Girl, Megami Device, and Megalomaria models.- The two drones on the back can also detach and transform from standby to flight mode. They can be displayed using the New Flying Base (sold separately) and HEXA GEAR Mini Flying Bases (sold separately).- The drones can also carry the paintball guns in flight mode.- There are 15 points for 3mm connection joints throughout the model.- The color scheme of this model kit is green, off-white, and clear. This model kit can be assembled into a product close to the original design. (The color scheme is different from the TAMOTU Type-S [White Ver.] that was released at the same time.) How to Enjoy: - TAMOTU Type-S can be freely customized with the M.S.G, Frame Arms Girl, and Hexa Gear series by using the 3mm connection points all over its body and the optional 3mm connection joints.- This 1/12 scale model can be placed together and enjoyed with other models with different scales such as NON scale Frame Arms Girl and 1/24 scale Hexa Gear models.Included Items:- TAMOTU Type-S Model- TAMOTU Head Cover- TAMOTU Front Hatch- Optional Arm- Drone (With Paintball Gun) Display Attachment Parts ×2- 3mm Connection Joints ×4"

"Introducing the TAMOTU Type-S!The stylish and cute robot TAMOTU is back as TAMOTU Type-S with a new loadout!MARUTTOYS is a world of original robot characters created by up-and-coming model designer MiZ (Kouki Mizuno).TAMOTU, the artist collaboration item between Kotobukiya and MARUTTOYS, is upgraded into TAMOTU Type-S and released as a plastic model kit!Setting:- TAMOTU Type-S is an upgraded security model of the TAMOTU robot.- The front and sides have additional armor, and the head is equipped with an additional sensor unit.- On its back are two drones and paintball guns. By working with the drones, this model is able to efficiently patrol buildings.- The guns can fire pellets filled with viscous paint that are able to blind cameras and slow down robots when fired at their joints.Model Specifications:- This model is a full action model kit with 26 points of articulation.- Can transform from the mobile "Normal Mode" to "Work Mode," in which the back and legs can be deployed.- TAMOTU is built with a complete inner frame. All outer parts can be detached from it.- The two paintball guns on the back are removable. The guns can also be used with Frame Arms Girl, Megami Device, and Megalomaria models.- The two drones on the back can also detach and transform from standby to flight mode. They can be displayed using the New Flying Base (sold separately) and HEXA GEAR Mini Flying Bases (sold separately).- The drones can also carry the paintball guns in flight mode.- There are 15 points for 3mm connection joints throughout the model.- The color scheme of this model kit is white, gray, and clear. This model kit can be assembled into a product close to the original design. (The color scheme is different from the TAMOTU Type-S [Green Ver.] that was released at the same time.) How to Enjoy: - TAMOTU Type-S can be freely customized with the M.S.G, Frame Arms Girl, and Hexa Gear series by using the 3mm connection points all over its body and the optional 3mm connection joints.- This 1/12 scale model can be placed together and enjoyed with other models with different scales such as NON scale Frame Arms Girl and 1/24 scale Hexa Gear models.Included Items:- TAMOTU Type-S Model- TAMOTU Head Cover- TAMOTU Front Hatch- Optional Arm- Drone (With Paintball Gun) Display Attachment Parts ×2- 3mm Connection Joints ×4"

VENOM! VENOM! VENOM!The long-awaited final form of Kotobukiya's MARVEL figures! This figure is the latest in Kotobukiya's artist series that reimagines characters in the unique art style of Japan's top artists.Introducing Venom as drawn by Hiroyuki Imaishi, animation director at anime studio TRIGGER and mind behind the original series Kill la Kill, the movie Promare, and many others.Imaishi has tapped into his experience as an animator to reimagine the symbiote known as Venom in his iconic art style with a bulging physique and powerful, humongous arms. The veins in Venom's arms look ready to burst at any moment as he looks poised to pounce on his next victim.While being an undeniable work of Imaishi, the figure-modeled by sculptor Keita Misono under Imaishi's supervision-features a clean, simple design that shows the director's love and admiration for both MARVEL and comic books as a whole. The result is a work of art with a presence like no other that can be appreciated from all sides.To give this one-of-a-kind figure the treatment it truly deserves, the body is colored with glossy Maziora paint. The paint, which changes color depending on the angle, provides depth to each individual muscle and makes for a wholly unique piece that will glitter and gleam in your collection.Add Hiroyuki Imaishi's Venom to your collection today.

"Spider Gwen, one of the new leaders of the Spider-Verse, is now available as a reproduction!Spider-Gwen is a character born from the comic ""Spider-Verse,"" which made a big splash by bringing together all the Spider-Men that have appeared before.What if Gwen Stacy was bitten by a spider instead of Peter Parker...?In other words, she is the Spider-Woman of a parallel universe!This figure is based on a design drawn by Shunya Yamashita and brought to life in a dynamic pose straight from his illustration.Just like in the first production of this figure, a face part of Gwen Stacy with her gorgeous blonde hair and characteristic eyes is also included. She can also be displayed without her hood and mask.*This reproduction will have a revised base color and packaging, as well as a different JAN code, product code, and price.*This product can not be sold in Mexico."

"Celebrating BISHOUJO's 15th Anniversary!!!The BISHOUJO series is celebrating this special year with the Ultimate BISHOUJO! This large 1/6 scale statue reaches a total height of over 30cm!The character chosen for this commemorative item was Invisible Woman, a member of the first ever super hero team in Marvel history. For Kotobukiya, Invisible Woman is also a special character that supported the BISHOUJO series in its early days.The BISHOUJO team took this anniversary year as a chance to look back at the illustration by Shunya Yamashita with fresh eyes, and took on the challenge of bringing this statue back to life with Kotobukiya's latest skills and techniques. The result was not just a simple reproduction, but the development of a whole new statue!The statue features her hair flowing in the breeze made with clear material and layered with a beautiful pearlescent paint, creating an airy and transparent tone. Complicated details, such as her irises and the inside of her mouth, have been recreated with a sense of depth and precision that only this large of a scale can bring to life. Her costume features a detailed contrast between the textured and glossy fabrics, with the recreation of even the fine wrinkles being perfectly and naturally captured.Her force field, as well as hands and feet, utilize clear material to make a beautiful gradient that gradually turns transparent at her fingertips.The BISHOUJO team is proud to present this statue as a commemorative item for fans all over the globe, as a piece that both showcases the history of the series and its future to come.The BISHOUJO series reimagines characters from popular comic books, games, and movies from a Japanese perspective and transforms them into unique "BISHOUJO" style statues.Based on art by illustrator Shunya Yamashita, the series aims to provide figures inspired by Japanese art to fans throughout the world.Since release of the first BISHOUJO statue in 2009, the series has continued for ten years and will continue for many more!Keep an eye out for more exciting additions to the ever-expanding BISHOUJO world!"

The Goddess of Thunder was quick to receive a BISHOUJO statue by Shunya Yamashita in 2016.Appearing out of thin air, the mysterious figure, Lady Thor, is none other than Jane Foster! For the first time in seven years, this statue will be rerproduced.Holding Mjolnir aloft, Thor stands in a pose fit for the God of Thunder.Her muscular figure strengthened by the power of Mjolnir, silver helmet and armor, and fluttering cape give the statue the elegance of a refined Asgardian. The statue can be displayed without the helmet by exchanging it with a separate head part.The base can be connected to that of the upcoming MARVEL LOKI LAUFEYSON BISHOUJO STATUE.*The color of the base and packaging have been revised for this reproduction. The JAN, product number, and price have also been changed accordingly.

"Metamorphose Unit is a series of option sets that expand the possibilities of the Megalomaria series. In addition to the Exarmor and weapon units inspired by ninja, Ninja Fox includes expansion skin parts that can be attached to Sousai Shojo Teien models. Exarmor Ninja Fox: The Exarmor parts are designed to fit Megalomaria female-body style models. Along with the eye-catching fox mask, the model comes with a headgear decorated with animal ears and a flashy scarf that can be attached using the ball joint at the base to allow for various expressions. The scarf can also be removed. The three claws on the three-point wrist joints can be articulated independently, enhancing the fun when creating expressive action poses. The sword can be attached to the back of the waist using a mount attachment. The unit is molded in burgundy, light gray, black, and clear orange. * The light gray is the same as that used for Principal's armor. Expansion Skin Parts: The newly sculpted neck, shoulders, and hip joint parts are expansion parts that can be used to customize certain areas with an uncovered design. The neck features a carefully sculpted collarbone that is highly compatible with the heads of the Sousai Shojo Teien models. The set includes two types of base parts for attaching the head: Type A (for Sousai Shojo Teien) and Type B (for Megami Device.) It also includes two types of neck ball joints: f5mm (compatible with Megalomaria, Sousai Shojo Teien, Arcanadea, and Frame Arms Girl) and f6mm (compatible with Megami Device). Thanks to the structure of the neck ball joint that allows it to slide backwards and forwards, and the axial rotation inherent to ball joints, a variety of flexible posing can be enjoyed using the multiple articulation features. The shoulder and hip joints are designed without the mecha details of the exterior. The hip joint has a pull-out structure that boasts a high range of movement and can be used as uncovered parts. It includes two types of hip joints: Type A (for Megalomaria female-body style models) and Type B for (Sousai Shojo Teien models.) *For Type B, please note that due to space limitations there are some characters it is not compatible with. Included Items: - 1 x Exarmor Ninja Fox - 1 x Expansion Skin Parts

"Metamorphose Unit is a series of option sets that expand the possibilities of the Megalomaria series.White Eagle is a set that combines the bird themed exarmor units such as the wings and beak, the Japanese themed fan and staff, and the expansion skin parts that can be attached to Sousai Shojo Teien models.Exarmor White Eagle:The Exarmor parts are designed to fit Megalomaria female-body style models.The clear parts designed after a beak can be removed from the visor. The voluminous wings can be flexibly positioned using the large three-point wrist joint, allowing for extravagant action poses.The talons attached to the ankle parts are also movable and can be changed to Hunting Mode. Part of the geta can also be changed to create High Geta Mode.The unit is molded in light gray, black, and clear orange.* The light gray is the same as that used for Principal's armor.Expansion Skin Parts:The neck, shoulders, and hip joint parts are expansion parts in Skin Color A that can be used to customize certain areas with an uncovered design.The neck features a carefully sculpted collarbone that is highly compatible with the heads of the Sousai Shojo Teien models.The set includes two types of base parts for attaching the head: Type A (for Sousai Shojo Teien) and Type B (for Megami Device.)It also includes two types of neck ball joints: f5mm (compatible with Megalomaria, Sousai Shojo Teien, Arcanadea, and Frame Arms Girl) and f6mm (compatible with Megami Device).Thanks to the structure of the neck ball joint that allows it to slide backwards and forwards, and the axial rotation inherent to ball joints, a variety of flexible posing can be enjoyed using the multiple articulation features.The shoulder and hip joints are designed without the mecha details of the exterior. The hip joint has a pull-out structure that boasts a high range of movement and can be used as uncovered parts.It includes two types of hip joints: Type A (for Megalomaria female-body style models) and Type B for (Sousai Shojo Teien models.)*For Type B, please note that due to space limitations there are some characters it is not compatible with.Included Items:- 1 x Exarmor White Eagle Set - 1 x Expansion Skin Parts Set"

"The eighth character in the Megalomaria Unlimited Universe series is Fuma, a ninja-inspired character that leverages the wide range of movement of the marionnette style. This is a deluxe kit that comes with various items such as a sword, claws, shuriken, kunai, and a scarf. Exarmor Ninja Fox: Along with the eye-catching fox mask, the model comes with a headgear decorated with animal ears and a flashy scarf that can be attached using the ball joint at the base to allow for various expressions. The scarf can also be removed. The three claws on the three-point wrist joints can be articulated independently, enhancing the fun when creating expressive action poses. The sword can be attached to the back of the waist using a mount attachment. Articulation Features: This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. The head and neck joints are newly sculpted, and removing the cover on the side of the head reveals a 3mm joint for customization. In addition, the range of motion of the head has been increased thanks to the structure of the neck ball joint that slides both backwards and forwards. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The separately sold MEGALOMARIA M.S.G EX HAND UNIT [Female Type A] can be used to further expand the range of posing options. By using the open hand, the model can even perform a handstand! Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Fuma. By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts. Included Items: - 1 x Fuma Model - 1 x Scarf - 1 x Detail Cover for Display Without Scarf - 1 x Seven Types of Hand Parts - 1 x Sword - 1 x Sword Attachment Part - 2 x Shuriken - 2 x Kunai - 2 x Shuriken/Kunai Attachment Part - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"The ninth release in the Megalomaria series is a character designed with the concept of a princess knight in mind. Along with the newly sculpted head and armor parts, this deluxe kit comes equipped with EXPANSION ARMOR Type E Dress Ver. and a VIRTUOUS STYLE SWORD featuring an exclusive color scheme. Newly Sculpted Parts: - Head (Tiara, Ribbon, Headgear, Visor, Base) - Armor (Shoulders, Knees, Ankles) - Skirt Armor Attachment Coloring: The coloring is based on Sousai Shojo Teien's Ritsuka Saeki, and uses the uniform color of St. Iris Gakuen Girls' High School as the armor color. A total of 10 different colors are used. Articulation Features: Like Principal, this kit features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent enough to allow the model to sit with one knee up. The knee armor can move independently and can be adjusted to various desired positions. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The Exarmor is inspired by a long apron dress and has 13 points of articulation. Each point has 3mm joints, meaning that they are highly versatile as parts for customization. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Combining the model with weapon units sold separately can turn the arms themselves into weapons, recreating a monster-like appearance. The normal wrist joints and spacer can be used freely to one's preference. Hands: Seven types of hands are included and consist of hands designed for holding swords and guns as well as knife-hand strike hands and multiple open hands. Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Green Glass. Included Items: - 1 x Green Glass Model- 1 x EXPANSION ARMOR Type E Dress Ver. Set - 1 x Bastard Sword (with Scabbard) Set - 1 x Longsword (with Scabbard) Set - 1 x Two Types of Sword Attachments - 1 x Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Point compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"Megalomaria Unlimited Universe's seventh release is a male-body style character designed with the concept of a cleric in mind.Heavily armed with two METAMORPHOSE UNITs, the model stands 180 mm tall.Articulation Features: Like MEPHISTO, this kit features approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses.The knee armor can move independently and can be adjusted to the desired position.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. EXARMOR BLACK COAT:Despite being a heavy armament, the fully moveable long coat-type Exarmor Black Coat features a wide variety of movable gimmicks to accommodate various poses, such as sitting in seiza even while the coat is equipped. The hem can be flipped backwards to recreate extravagant action scenes, or make riding the separately sold Nights Superior possible. The shoulder armor uses double joints, so the position of the armor can be adjusted so as not to hinder movement, making poses with a sword held in both hands possible.GRAVE ARMS2:Grave Arms2 is a cross-shaped composite weapon full of surprises, featuring a giant cannon inside a large sheath that also includes a laser blade and two handguns. In addition to a partial transform into a greatsword, by removing the grips and attaching the included effect parts, a laser blade can also be recreated, just like the flashy special moves of a hero in an action movie. It can be mounted to the model's back using the flexible arm.Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward.Larger joints than female-body style characters, such as Principal, allow the model to hold larger, more powerful weapons.The normal wrist joints and spacer can be used freely to one's preference.Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands.Color Scheme:The model uses eight colors; black, dark gray, gray, light gray, white, clear yellow, turquoise (partially translucent,) and gunmetal.Included Items:- Ghillie Du Model x1- METAMORPHOSE UNIT EXARMOR BLACK COAT x1- METAMORPHOSE UNIT GRAVE ARMS2 x1- Laser Blade Effect Part (Blade) x1- Seven Types of Hand Parts- Ponytail x1- Waist Armor Part (No Connection Point) ×1- Standard Wrist Joint and Spacer x1 (Left and Right)- Single-Piece Rear Armor x1"

"The sixth character in the MEGALOMARIA UNLIMITED UNIVERSE series is Mephisto, the much anticipated first male-body style character.Boasting an impressive 54 points of articulation, the model stands 180mm tall.Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses.The knee armor can move independently and can be adjusted to the desired position.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward.Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons.The normal wrist joints and spacer can be used freely to one's preference.Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands.Color Scheme:The model uses six colors; dark red, black, clear red, light gray, clear blue (partially translucent), and gold (partially translucent). Included Items:- 1 x Mephisto Model - 1 x Wrist Blades (Left and Right)- 1 x Seven Types of Hand Parts- 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"By popular demand from many users, the tenth MEGALOMARIA character is a prototype color version Mephisto. Color Scheme: The model uses three colors, HEXA black, HEXA grey, and clear turquoise green, a combination designed to match well with both M.S.G and HEXA GEAR. Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands. Included Items: - 1 x Mephisto Model - 1 x Wrist Blades (Left and Right) - Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

An image change from white nurse to black nurse, Peridot is a dark color variation of Ruby Eye created by changing up the molding colors. Two accent colors are included, semi-transparent lime green and semi-transparent bubblegum pink, allowing for either a black and lime green Peridot or a black and bubblegum pink Ruby Eye Creep Poison to be assembled. Exarmor Black Nurse/Scalpel/Injector: The two included accent color parts use psychedelic colors that contrast beautifully with black. Assembly with either color is possible. The included Energeed (Energy Seed) are molded in both accent colors and clear parts, allowing for a total of four to be assembled. The skirt features a 3mm joint on each part and consists of six points of articulation. Modeled after surgical knives, the two included Scalpel swords can be connected using the connection part to create a double-bladed sword. The injectors can be attached to hardpoints on the forearms or removed and used as handheld weapons. Articulation Features: This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Combining the model with weapon units sold separately can turn the arms themselves into weapons, recreating a monster-like appearance. The normal wrist joints and spacer can be used freely to one's preference. Hands: Seven types of hands are included and consist of hands designed for holding swords and guns as well as knife-hand strike hands and multiple open hands. Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. In addition to the mask with an eyepatch, Peridot also comes with a mask with both eyes open. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Ruby Eye. Included Items: ·Peridot Model x1 ·Lime Green Accent Color Parts (semi-transparent) x1 ·Bubblegum Pink Accent Color Parts (semi-transparent) x1 ·Mask (Both Eyes Open) x1 ·Mask (Eyepatch) x1 ·Seven Types of Hand Parts ·Scalpel x2 ·Double-Bladed Mode Connection Part x1 ·Injector x2 ·Energeed x4 ·Hip Armor with 3mm Connection Joint compatible with Flying Base x1 ·Standard Wrist Joint and Spacer x1 (Left and Right) ·Single-Piece Rear Armor x1

"The eleventh character in the Megalomaria Unlimited Universe series is Zekuu! Designed with the concept of a tengu in mind, Zekuu joins Fuma as a character with a Japanese theme.The wings, fan, and staff option parts come together to give this deluxe item a distinctive silhouette. The mask includes the same movable eye feature as Principal, with an adjustable line of sight. The eyes can be adjusted in any direction using the handle of the included fan.Exarmor Black Crow:The clear parts designed after a beak can be removed from the visor. The voluminous wings can be flexibly positioned using the large three-point wrist joint, allowing for extravagant action poses.The talons attached to the ankle parts are also movable and can be changed to Hunting Mode. Part of the geta can also be changed to create High Geta Mode.Articulation Features:This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. Including the Exarmor, there are more than 70 points of articulation. The knee joint is comprised of a single layer of joints, allowing the model to sit with one knee up, its legs crossed, and various other action poses.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed staff stances.The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The right and left hip joints can move independently in all four directions, with extensive forward movement allowing users to recreate an incredible range of poses from high kicks to sitting curled up.For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely.Compatibility of Heads and Masks:The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so they can be used interchangeably.The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet.The eyes can look in all directions and be adjusted by using the handle of the included fan.*Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Zekuu.By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts.Included Items:- 1 x Zekuu Model - 1 x Seven Types of Hand Parts- 1 x Wings (Left and Right)- 1 x Staff - 1 x Fan - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"Megami Device" is a new plastic model kit series which you enjoy by attaching weapon and armor parts on to articulated Bishoujo models. The latest character to join this series is ASRA ARCHER designed by Nidy-2D- in a new color variant with new decals included! A special base with the Megami Device logo is also included with this model kit.

Introducing ASRA NINE-TAILS MATSURI, the latest model from Megami Device, a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor!NINE-TAILS changes from the M.S.G-clad form to a new version adorned in beautiful traditional Japanese clothing.Returning to the series as ASRA NINE-TAILS MATSURI, this model kit features major adjustments to the proportions that bring the immensely popular ASRA series in line with the AUV series.Inspired by Japanese summer festivals, the model dons a mini Japanese yukata comprised of entirely new parts. The new accessories of fox ears, a tail, and a fan with feathers add to the festive feeling of the kit.Includes updated ASRA series connection parts for the new proportions. These parts allow for the armaments in the ASRA NINE-TAILS kit (sold separately) to be equipped.This model was designed by Nidy-2D-, the designer of the ASRA series!The "machineca Block1.5L" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:·The model features mature proportions and detailed coloring thanks to its greater volume and intricate part separation.·Includes a shikigami, blade-style shikigami, and fan-style shikigami. Recreate festival scenes with these items.·The expressions are newly designed by Nidy-2D- and recreated by Amaai. Includes two pre-painted face parts and one face part used with decals.·The kit is compatible with ASRA NINE-TAILS and ASRA TAMAMONOMAE. Mix and match parts to customize the model.·The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.·The kit includes a variety of weapons and joint parts that can be used to create different combat scenes.·The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts.·Includes decals for the eyes and markings.What is "Megami Device?"Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles.Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!

""Megami Device" is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor. The latest character to join the series is ASRA NINJA AOI!Megami Device is a series of plastic model kits that allow you to assemble your own fully poseable model and equip her with weapons and armor.The models utilize a main body known as a "machinika" designed by Masaki Apsy. And the design for this model was handled by Nidy-2D-!Model Specifications:·The newly designed hair parts were created using new molds and the standard hair parts are included in a new color scheme.· The model kit includes bare arm and leg parts.· The character model is made with a new color scheme, and the weapon blades are made with clear pink plastic.· The model kit includes new decals for the eyes and body markings.·The model comes with three pre-painted face parts.·The parts can be configured to display the model in her ninja-inspired armor for "Armed Mode," or without her armor for "Unarmed Mode."·This model has a feature where the armor parts can be combined with ASRA ARCHER to create "Samurai Mode".·The "machinika" body base boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses.·The model kit includes a variety of weapons, including ninja stars, kunai, and a katana, allowing users to recreate different battle scenes.· The model is equipped with several 3mm connection points, making it compatible with existing M.S.G, Frame Arms, and Frame Arms Girl weapons and armor.·The kit includes 5 sets of PVC hands that are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series.Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Introducing ASRA NINJA KANAME, a new model from Megami Device, a plastic model kit series combining bishoujo-style beauties and heavy-duty weapons and armor!The immensely popular ASRA series launches in a new form.Returning to the series as ASRA Ninja Kaname, this model kit features major adjustments to the proportions and updates the silhouette to bring it in line with the AUV series.The model kit can be enjoyed as is or customized with other models in the ASRA series.This model was designed by Nidy-2D-, the creator of the ASRA series!The ""machinika Block1.5L"" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:- The model features mature proportions and detailed coloring thanks to its greater volume and intricate part separation.- Includes the highly versatile short swords "Mumei" and large shuriken "Fuuma." The short swords can be attached to the mask, leg armor, and the large shuriken.- The expressions are newly designed by Nidy-2D- and recreated by Amaai. Includes two pre-painted face parts and one face part used with decals.- The parts can be configured to display the model in armor for "Armed Mode," or without armor for "Unarmed Mode."- Includes connection parts which allow ASRA series gear to be compatible with the new proportions. The weapon unit included with the separately sold ASRA Ninja is also compatible.- The "machinika" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.- The kit includes a variety of weapons and joint parts that can be used to create different combat scenes.- The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts.- Includes decals for the eyes and markings.What is "Megami Device?"Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machinika," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Introducing ASRA TAMAMONOMAE UTAGE, the latest model from Megami Device, a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor! TAMAMONOMAE changes from the M.S.G-clad form to a new version adorned in beautiful traditional Japanese clothing. Returning to the series as ASRA TAMAMONOMAE UTAGE, this model kit features major adjustments to the proportions that bring the immensely popular ASRA series in line with the AUV series. Inspired by Japanese summer festivals, the model dons a mini Japanese yukata comprised of entirely new parts. The new accessories of fox ears, a tail, and a fan with feathers add to the festive feeling of the kit. Includes updated ASRA series connection parts for the new proportions. These parts allow for the armaments in the ASRA TAMAMONOMAE kit (sold separately) to be equipped. This model was designed by Nidy-2D-, the designer of the ASRA series! The ""machineca Block1.5L"" body designed by Masaki Apsy allows for beautiful and dynamic poses. Model Specifications: - The model features mature proportions and detailed coloring thanks to its greater volume and intricate part separation. - Includes a shikigami, blade-style shikigami, and fan-style shikigami. Recreate festival scenes with these items. - The expressions are newly designed by Nidy-2D- and recreated by Amaai. Includes two pre-painted face parts and one face part used with decals. - The kit is compatible with ASRA NINE-TAILS and ASRA TAMAMONOMAE. Mix and match parts to customize the model. - The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down. - The kit includes a variety of weapons and joint parts that can be used to create different combat scenes. - The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts. - Includes decals for the eyes and markings. What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series! "Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"The latest model to join Megami Device is a variation of Susanowo Regalia, AUV AME NO UZUME SUNSHINE!Based on Ame-no-Uzume from the Japanese legend of Amano-Iwato, the popular AUV Amaterasu Regalia kit features a color scheme that portrays a dancer.The elegant black and purple base colors are reimagined to a yellow and white color scheme that symbolizes radiant sunlight.The newly designed face shows off a bright and hearty smile. The torso has also been changed to reveal more skin for a more seductive look.The skin features a new color, Skin Color E, for a healthy and active appearance.Megami Device is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor.This model was designed by Nidy-2D-, the creator of the ASRA and AUV series!The ""machineca"" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:- The model comes with three newly designed pre-painted face parts: Smiling, dancing, and singing.- The torso features more exposed skin.- Comes in the new Skin Color E.- The parts for the signature weapons and large cape draped over the legs can be reconfigured to create a wide variety of forms for users to enjoy.- The parts can be configured to display the model in full armor for "Armed Mode," or without armor for "Unarmed Mode."- This kit is highly compatible with M.S.G DRESS UP PARTS CUTE RIBBON SET SKY BLUE Ver. (sold separately) and can be used as an official additional part.- The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.- The kit includes a variety of weapons and joint parts that can be used to create different combat scenes.- The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, and Arcanadea series parts.- Includes decals for the eyes and other markings.What is "Megami Device?"Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Introducing a new model from the Megami Device series, a plastic model kit series combining bishoujo-style beauties and heavy-duty weapons and armor.The latest character to join the series is GUREN, the counterpart to AUV SUSANOWO SOUEN!Loved for the over-the-top effect parts, the Souen model returns in an all-new color with Guren!The red and clear yellow color scheme transforms her appearance, delivering an energetic, fiery look. In addition, the new skin parts in Skin Color D (tan) and eye prints bring out another side of the character.As a counterpart to Souen, the newly sculpted flame effects are on the opposite side of the head and chest.This model was designed by Nidy-2D-, the creator of the ASRA and Susanowo series!The ""machinika Block1.5L"" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:- A number of newly sculpted clear flame effect parts and joints for connecting those parts are included in this model kit.- Three face parts with newly designed expressions by Nidy-2D- are included.- As with the AUV series, users can look forward to a glamorous model loaded with features.- The mecha arms and legs use a frame construction that allows for a wide range of customization. The armor can be removed to reveal the frame and attach a variety of different parts.- The model comes with several armor parts that can be used to recreate different forms such as "Insane Mode" and "Brutal Mode."- The main weapon, Heat Haze, is equipped with several joints that allow it to be transformed into a whip, gun, or tail and also be enjoyed on its own.- The parts can be configured to display the model in full armor for "Armed Mode," or without armor for "Unarmed Mode."- The "machinika" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.- The kit includes a variety of weapons and joint parts that can be used to create different combat scenes. Recreate a variety of different spectacular combat scenes with the new effect parts.- The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts.- The kit includes decals for the eyes and other markings."