Chiffres d'anime

threezero's Jujutsu Kaisen series is under the FigZero product line, which is well-known for its highly poseable 1/6th scale figures, detailed head sculpt, and tailor-made outfits to capture the memorable appearance as seen in the original anime series.FigZero 1/6 Yuji Itadori is approximately 11.3 inches (28.8cm) tall, and is a fully-articulated collectible figure with over 32 points of articulation. The head is sculpted by renowned sculptor Akinori Takaki, and the materials used for the figure are mainly PVC and ABS.The character's costume includes a hoodie, Jujutsu High jacket, Jujutsu High slacks, and socks, which are all made of fabric. The figure comes with two interchangeable face parts (both neutral face and angry face) and five sets of interchangeable hands including a left hand with Sukuna's mouth growing on the palm. Other accessories include one piece of Sukuna's finger, one piece of Slaughter Demon and its sheath, on pair of sneakers, and one pair of Divergent Fist effect pieces. Sukuna's Finger can be stored inside the seal box included with the FigZero 1/6 Megumi Fushiguro figure (sold separately).Materials: PVC, ABS and fabric

From the "ULTRAMAN SUIT ANOTHER UNIVERSE" project, the ULTRAMAN SUIT TIGA POWER TYPE variant joins the FigZero line! It dons a metallic red color and inlcudes ancillary gear originally designed by threezero!FigZero 1/6 ULTRAMAN SUIT TIGA POWER TYPE collectible is 1/6th scale, standing approximately 31.6cm (~12.4") tall, and is a fully-articulated figure with over 47 points of articulation. ULTRAMAN SUIT TIGA POWER TYPE has an exquisitely detailed paint application, and is constructed partially of die-cast zinc alloy with other metal parts. LED light-up features are installed in the eyes, at the Tiga Crystal on the forehead, and the Color Timer on the chest.The original ancillary gear designed especially for this figure are a pair of Shoulder Boosters and a pair of Deracium Gauntlets. The Shoulder Boosters are interchangeable with the standard shoulder armor, and the Deracium Gauntlets consist of two detachable parts; a base and outer piece. The knuckles of the outer piece are articulated to be able to cover the fist.The figure also includes three pairs of interchangeable hands (one pair of fists, one pair of opened hands, and one pair for the Zeperion Beam shooting pose). Also included are two pairs of interchangeable Zeperion Beam Shooting Device cover parts for both open form and closed form for each forearm.FEATURES:- 1/6th scale, approximately 31.6cm (12.4") tall- Original body with over 47 points of articulation- Exquisitely detailed paint application with original metallic red colorway- Includes threezero original ancillary gear (Shoulder Boosters and Deracium Gauntlets)ACCESSORIES:- Two (2) pairs of interchangeable shoulder parts: One (1) pair of standard shoulder armors and one (1) pair of Shoulder Boosters- One (1) pair of Deracium Gauntlets (can be separated into base and outer piece)- Two (2) pairs of interchangeable forearm covers: One (1) pair of Zeperion Beam Shooting Device in closed form and one (1) pair in opened form- Three (3) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of opened hands, one (1) pair for Zeperion Beam shooting poseLED FEATURES:- Eyes- Tiga Crystal on forehead- Color Timer on chestBatteries required (4x AG1, not included).

The new item from the FigZero 1/6th scale articulated figure series based on the anime series CHAINSAW MAN is the beautiful, mysterious, and deadly Makima! With her highly detailed head sculpt and tailor-made Public Safety Devil Hunters uniform with overcoat, this collectible figure captures her unforgettable appearance as seen in the original anime series.FigZero 1/6 Makima stands approximately 11 inches (28 cm) tall. She is a fully-articulated collectible figure with approximately 32 points of articulation and an incredible head sculpt. The primary materials for the figure are ABS, PVC, POM, and fabric. The braid at the back of her head is made of soft PVC with metal wire inside for action poses.Makima includes two interchangeable faceplates that can be exchanged between a standard expression and an ominous expression and six sets of interchangeable hands, including her ritual-pose hands which perfectly replicate the iconic scene revealing Makima's grisly abilities. Furthermore, the figure comes with a beer mug, a beer piece to be placed inside the mug, and a candy lollipop. The character's Public Safety Devil Hunters uniform includes a white shirt, a pair of slacks, a necktie, and an overcoat, which are all made of fabric. The overcoat has a metal wire sewn inside the hem for expressive poseability.FEATURES- 1/6th scale, approximately 11 inches (28 cm) tall - Approximately 32 points of articulationPUBLIC SAFETY DEVIL HUNTERS UNIFORM- One (1) fabric white shirt- One (1) fabric slacks- One (1) fabric necktie- One (1) fabric overcoat- One (1) pair of shoesACCESSORIES- Two (2) interchangeable faces: One (1) standard expression and one (1) ominous expression- Six (6) sets of interchangeable hands: One (1) pair of fists, One (1) pair of ritual hands with palms together, one (1) pointing right hand, one (1) left hand to be placed on chin, one (1) right hand for holding beer mug, one (1) right hand for holding candy lollipop- One (1) beer mug- One (1) beer piece to be placed inside the beer mug- One (1) candy lollipop

From the "ULTRAMAN" Season 2 anime, ULTRAMAN SUIT TARO is now available as a 1/6th scale articulated figure! Kotaro Higashi, a young journalist with strong sense of justice, has suddenly acquired a unique ability due to a mysterious incident, and happens to obtain a new ULTRAMAN SUIT still in development. Under the name of TARO, he enters battle against aliens attacking earth. FigZero 1/6 ULTRAMAN SUIT TARO (Anime Version) stands approximately 31cm (~12.2") tall, and is a fully-articulated figure with over 52 points of articulation. The collectible has a detailed paint application and decals, and is constructed partially of die-cast zinc alloy and other metal parts. LED light-up features are installed at the eyes and the Color Timer on the chest.TARO's iconic blazing fire effects come in multiple forms for this collectible: 1 pair for chest, 1 pair for upper back, 1 pair for lower back, 1 pair for fists, and 1 piece in shooting form. Other accessories include the Ultra Badge which Kotaro uses in transforming into ULTRMAN SUIT TARO form, and multiple interchangeable hands: 1 pair of fists, 1 pair of knife-hands, 1 pair of fire shooting hands, and 1 right hand for holding the Ultra Badge.Features:- 1/6th scale, approximately 31cm (~12.2") tall- Fully-articulated figure with over 52 points of articulation- Exquisitely detailed paint application and decalsACCESSORIES - Four (4) pairs and one (1) piece of Fire effect parts: One (1) pair for chest, one (1) pair for upper back, one (1) pair for lower back, one (1) pair for fists, and one (1) piece in shooting form- One (1) piece of Ultra Badge- Three (3) pairs and one (1) piece of Interchangeable hands: One (1) pair of fists, one (1) pair of knife-hands, one (1) pair of fire shooting hands, and one (1) right hand for holding Ultra BadgeLED FEATURES * - Eyes - Color Timer on chestMaterials: PVC, ABS, die-cast zinc alloy, metal partsRequires 4 x AG1 Button Cell Batteries (batteries not included).

The Forgers goes on a winter vacation, changes the course of the world's fate, and Anya Forger makes an exciting return to threezero's FigZero 1/6 scale figure series, with a brand-new winter costume as seen in the movie SPY×FAMILY CODE: White!FigZero 1/6 Anya Forger (Winter Costume Ver.) is approximately 6.5" (16.5 cm) tall, and is a fully-articulated collectible figure made of ABS, PVC, and POM plastics with approximately 21 points of articulation and fabric textiles. The detailed sculpts and tailored outfits bring the anime character to life.FigZero 1/6 Anya Forger (Winter Costume Ver.) comes with a total of five interchangeable faceplates (smiling face, heh face, exciting face, happy face, and shocked face) and six pairs of interchangeable hands to showcase her expressive demeanor! Her winter costume includes a bisque coat, a red hat, grey stockings, brown boots, bracelets, and a bag with a belt, ready to embark on an amazing journey!FEATURES- Approximately 6.5" (~16.5cm) tall- Approximately 21 points of articulation- Five interchangeable faceplates with iconic expressions- Costume made of a combination of fabric and plastic parts- Various accessories provided for different posesCOSTUME- One (1) pc of Bisque Coat- One (1) pc of red hat- One (1) pair of grey stockings- One (1) pair of brown boots- One (1) pair of bracelets- One (1) pc of bag with beltACCESSORIES- Five (5) interchangeable faceplates: one (1) smiling face, one (1) heh face, one (1) exciting face, one (1) happy face and one (1) shocked face- Six (6) pairs of interchangeable hands: gloved fists, gloved opened hands, fists, opened hands, relaxed hands, and pointing hands

From the TV series "Gridman the Hyper Agent", FigZero Gridman the Hyper Agent is made into a 12inch articulated figure!FigZero Gridman the Hyper Agent stands approximately 30cm tall (non-scale), and is a fully-articulated figure with approximately 38 points of articulation. The costume is made of a combination of fabric and plastic, featuring a unique coating to recreate the texture as seen in the TV series. The collectible figure is full of high-precision sculpted details, and LED light-up features are installed at the eyes and the chest.As for its weapon, it comes with a Plasma Blade in a long form, a Plasma Blade in a short form, and a Barrier Shield. The long Plasma Blade can be combined with the Barrier Shield to form Gridman Sword. The short Plasma Blade can be combined with the Barrier Shield to form Thunder Axe. The figure also includes 4 pairs of interchangeable hands: 1 pair of fists, 1 pair of Fixer Beam hands, 1 pair of relaxed hands, and 1 pair of weapons holding hands. Together, it can replicate various scenes from the TV series.FEATURES - Non-scale, approximately 30cm (12") tall- Fully articulated body with approximately 38 points of articulation- Costume made of a combination of fabric and plastic, featuring a unique coating to recreate the texture seen in the television series- High-precision sculpted detail- Plasma Blade (Long) can be combined with Barrier Shield to form Gridman Sword- Plasma Blade (Short) can be combined with Barrier Shield to form Thunder AxeACCESSORIES - 2x pcs of Plasma Blades: one (1) Long and one (1) Short- 1x pc of Barrier Shield- 4x pairs of interchangeable hands: one (1) pair of Fists, one (1) pair of Fixer Beam Hands, one (1) pair of Relaxed Hands, and one (1) pair of Weapon Holding Hands*LED FEATURES- Eyes- ChestRequires AG13 batteries x 4 (Batteries Not Included)

threezero's SPY×FAMILY 1/6 scale figure series falls under the FigZero product line, known for its highly-poseable anime figures with detailed sculpts and tailored outfits that bring to life the recognizable character designs as seen in the beloved anime series.FigZero 1/6 Loid Forger is approximately 12" (31.2 cm) tall, and is a fully-articulated 1/6-scale collectible figure made of ABS, PVC, and POM plastics with 32 points of articulation and fabric textiles. FigZero 1/6 Loid Forger's costume features his iconic suit, comprising a white shirt, red necktie, vest, jacket, pants, and shoes. Additionally, the costume includes his glasses and wristwatch. Other accessories consist of a pistol, newspaper, two interchangeable faceplates (one with a default expression and one with a smiling face), as well as four sets of interchangeable hands for creating dynamic action poses.FEATURES- Approximately 12" (~31.2cm) tall- Approximately 32 points of articulation- Costume made of a combination of fabric and plastic parts- Various accessories provided for different posesCOSTUME- One (1) pc of white shirt- One (1) pc of red necktie- One (1) pc of suit vest- One (1) pc of suit jacket- One (1) pair of suit pants- One (1) pair of shoes- One (1) pair of glasses- One (1) pc of wristwatchACCESSORIES- One (1) pc of pistol- One (1) pc of newspaper- Two (2) interchangeable face parts: one (1) face with the default expression, and one (1) smiling face - Four (4) sets of interchangeable hands: one (1) pair of relaxed hands, one (1) pair of fists, one (1) pistol holding right hand, and one (1) newspaper holding left hand

From the anime 'ULTRAMAN' FINAL Season, the ULTRAMAN SUIT C-TYPE joins the FigZero line! It is the final and ultimate ULTRAMAN SUIT used by the protagonist Shinjiro Hayata.FigZero 1/6 ULTRAMAN SUIT C-TYPE (Anime Version) is a fully articulated collectible figure standing approximately 31.6cm (~12.4") tall, featuring detailed paintwork with expert decal application. It has the most advanced articulation and alloy materials within the series with over 54 points of articulation, including a newly added three-segment articulation in the waist and a two-segment articulation in the ankles. The alloy structures are incorporated in the body frame, hip joints, knee joints, and ankle joints, significantly enhancing stability and weight. LED light-up features are installed in the eyes, the Color Timer on the chest. FigZero 1/6 ULTRAMAN SUIT C-TYPE (Anime Version) includes a Specium beam effect piece. Other accessories included are multiple interchangeable hands including one pair of opened hands, one pair of fists, one pair of knife-hands, and one pair of hands with forefinger and middle finger pointed frontwards.FEATURES - 1/6th scale, approximately 31.6 cm (12.4") tall- Original body with over 54 points of articulation- Zinc alloy die-cast main frame- Exquisitely detailed paint application and decalsACCESSORIES - 1x Specium beam effect pieces- 5x set of interchangeable hands: one (1) pair of opened hands, one (1) pair of fists, one (1) pair of knife-hands, one (1) pair of hands with forefinger and middle finger pointed frontwardsLED FEATURES * - Eyes- Color Timer on chestRequires AG1 batteries x 4 (Batteries Not Included).

The Forgers goes on a winter vacation, changes the course of the world's fate, and Loid Forger makes an exciting return to threezero's FigZero 1/6 scale figure series, with a brand-new winter costume as seen in the movie SPY×FAMILY CODE: White!FigZero 1/6 Yor Forger (Winter Costume Ver.) is approximately 11.2" (28.5 cm) tall, and is a fully-articulated collectible figure made of ABS, PVC, and POM plastics with approximately 35 points of articulation and fabric textiles. The detailed sculpts and tailored outfits bring the anime character to life.FigZero 1/6 Yor Forger (Winter Costume Ver.)'s costume features the outfit she wears in the movie, SPY×FAMILY CODE: White, which includes a white hat, beige coat, white shirt, a belt with sheaths, blue jumper skirt, yellow stockings, brown boots. Other accessories include a pair of knives, three interchangeable faceplates (default expression, smiling face, and serious face), as well as four pairs of interchangeable hands to create dynamic action poses.FEATURES- Approximately 11.2" (~28.5cm) tall- Approximately 32 points of articulation- Costume made of a combination of fabric and plastic parts- Various accessories provided for different posesCOSTUME- 1x white hat- 1x beige coat- 1x) white shirt- 1x belt with sheaths- 1x blue jumper skirt- 1x pair of yellow stockings- 1x pair of brown bootsACCESSORIES- 1x pair of knives- 3x interchangeable face parts: One (1) face with the default expression, one (1) smiling face, and one (1) serious face- 4x pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of knife-holding hands, and one (1) pair of knifehand strike

The latest addition to threezero's ROBO-DOU line based on Mobile Police Patlabor are the Ingram Reactive Armor Version figures from the animation movie "Patlabor 2: The Movie"! Unit 1, Unit 2, and Unit 3 respectively equipped with the Reactive Armor are being released at the same time.ROBO-DOU Ingram Unit 1 Reactive Armor Version collectible is a 1/35th scale (approximately 23cm tall) articulated figure with a remarkable zinc alloy die-cast main frame, providing nearly 50 points of articulation. The figure is constructed of ABS, PVC, POM, and fabric. Fabric is used to cover the arms and thighs, to replicate the Ingram silhouette and at the same time secure ariticulation capabilities. The iconic Reactive Armor jacket parts are made of PVC replicating its details. Threezero's notable weathering effects are added on the fabric and the Reactive Armor jacket parts to create an enhanced authenticity.The ROBO-DOU Ingram Unit 1 Reactive Armor Version includes many interactive features to increase playability. The right calf's side cover can be opened, and the hand revolver cannon can be stored inside the right calf. The right hand's wrist can be extended to reach for the stored revolver cannon. The front part of the reactive armor is detachable, and the cockpit hatch underneath can be opened. Pilot figure of Noa Izumi in the design of "Patlabor 2: The Movie" (non-articulated) can be seated inside the cockpit. The cockpit seat can be elevated to have the pilot's head to appear at the neck of Ingram, and the windshield can be opened up at the neck. Equipment includes a hand revolver cannon, stun stick in extended form, stun stick in retracted form, a riot gun, and a shield for left forearm (stun stick in retracted form can be stored inside). It also comes with interchangeable parts including a face piece with the faceguard up, a variety of hands in different poses, and a ROBO-DOU action stand.FEATURES:- 1/35th scale, approximately 23cm tall articulated figure- Materials used: ABS, PVC, POM, ZINC ALLOY (Joint covers uses fabric, and Reactive Armor jacket parts are made of PVC)- Fully articulated figure with nearly 50 points of articulation- Right calf's side cover can be opened (hand revolver cannon can be stored inside)- Right wrist extension function- Cockpit covers can be opened (after detaching the front part of the Reactive Armor jacket)- Cockpit seat can be elevated- Windshield can be opened at the neckACCESSORIES- Hand revolver cannon- Stun stick (extended)- Stun stick (retracted)- Riot gun- Shield for left forearm (retracted stun stick can be stored inside)- Interchangeable face piece where the face guard is up- Interchangeable hand pieces (relaxed hands x 1 pair, opened hands x 1 pair, fists x 1 pair, right hand for holding hand revolver cannon, holding stun stick hand x 1 pair, right hand for holding riot gun)- Pilot figure (Noa Izumi)- ROBO-DOU action standMaterials: ABS, PVC, POM, die-cast zinc alloy, fabric

From the movie "SHIN MASKED RIDER," threezero is proud to announce FigZero 1/6 Masked Rider No.2+1 (SHIN MASKED RIDER), capturing the appearance as seen in the 2023 movie through its highly detailed helmet sculpt and Rider Belt, and tailor-made outfits.FigZero 1/6 Masked Rider No.2+1 (SHIN MASKED RIDER) stands approximately 12.6 inches (32cm) tall. It is a fully-articulated collectible figure with over 32 points of articulation. The collectible figure has a precise sculpted detailing including a weathering effect on the gloves and boots. The materials used for the figure are mainly ABS, PVC, POM, and fabric.The FigZero 1/6 Masked Rider 2+1 (SHIN MASKED RIDER) comes with a combat suit outfit made by a combination of fabric and plastic parts. It also features a fabric scarf which contain wire inside at the edges, making them poseable. An LED light is installed inside the eyes located in the helmet for lighting effect. The jaw piece of the mask "Crusher" is articulated to be able to adjust length for mouth movement. He comes with two pairs of interchangeable boots, where one pair is for better articulation with parts separated at the ankles, and another pair where each boot is made as a single piece for a seamless appearance. Additional accessories included five pairs of interchangeable hands and two vintage-style telephones in different colors are included to capturing the appearance as seen in the "Moshi Moshi Telephone" promotional project for the film.FEATURES- 1/6th scale, approximately 12.6 inches (32 cm) tall - Over 32 points of articulation- Highly realistic custom tailoring- The jaw piece of the mask "Crusher" is articulated to be able to adjust lengthCOSTUME- One (1) combat suit made of plastic and fabric- One (1) Rider Belt made of plastic- One (1) pair of forearm cover piece of the gloves made of plastic - Two (2) pairs of boots made of plastic: one (1) pair of boots which is separated at the ankles for better articulation, one (1) pair of boots with each boot made as a singular piece for a seamless appearance- One (1) scarf made of fabric with wire inside at the edgesACCESSORIES- Five (5) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of posed hands, one (1) pair of hands for holding telephone, one (1) pair of action hands.- One (1) Telephone (Green)- One (1) Telephone (Red)LED FEATURES - Eyes on the Helmet

From the anime "Fullmetal Alchemist: Brotherhood," 1/6 scale collectible figure Edward Elric and Alphonse Elric is released as a set! This merchandise consists of "FigZero 1/6 Edward Elric", "FigZero 1/6 Alphonse Elric", and additional accessories for Edward exclusive for this set."FigZero 1/6 Edward Elric" is an articulated figure approximately 25cm tall. Its costume uses fabric. The face piece is interchangeable between a standard face and an angry face, and the front hair piece is interchangeable between a standard hair and an action hair. Other accessories include a spear, an Automail blade, a pocket watch, and 9 sets of interchangeable hands which makes it possible to replicate various scenes in the anime."FigZero 1/6 Alphonse Elric" is an articulated figure approximately 36.8cm tall. The figure partially uses fabric. The head piece is interchangeable between a standard head and a comical expression head, and the standard head has a LED light-up feature installed at the eyes. Other accessories include Xiao-Mei (Panda), Cat, 3 pairs of interchangeable hands which makes it possible to replicate various scenes in the anime.Twin-Pack includes the following bonus accessories for Edward in addition to the basic accessories: Comical expression face, sleeveless shirt, boxers, bare right foot, and Automail left foot.Also released at the same time and sold separately are single version merchandises of "FigZero 1/6 Edward Elric" and "FigZero 1/6 Alphonse Elric".

From the anime "Fullmetal Alchemist: Brotherhood," 1/6 scale collectible figure Edward Elric is released! "FigZero 1/6 Edward Elric" is an articulated figure approximately 25cm tall. Its costume uses fabric. The face piece is interchangeable between a standard face and an angry face, and the front hair piece is interchangeable between a standard hair and an action hair. Other accessories include a spear, an Automail blade, a pocket watch, and 9 sets of interchangeable hands which makes it possible to replicate various scenes in the anime.Also released at the same time and sold separately are "FigZero 1/6 Alphonse Elric", and also "FigZero 1/6 Edward Elric + Alphonse Elric Twin-Pack" which is a set with special exclusive accessories added.Features:- 1/6th scale, approximately 25cm (9.84 inches) tall- Original body with over 36 points of articulation- Exquisitely detailed decals & paint applicationAccessories:- Coat- Jacket- Vest- Belt- Pants- Boots- Spear- Automail blade- Pocket watch- Two (2) pieces of hair front hair parts: One (1) standard hair, one (1) action hair- Two (2) pieces of interchangeable face parts: One (1) standard face, one (1) angry face- Nine (9) sets of interchangeable hands: One (1) left bare fist, one (1) right Automail fist, one (1) left bare prayer hand, one (1) right Automail prayer hand, one (1) pair of gloved relaxed hands, one (1) right Automail hand for holding weapon, one (1) left posed gloved hand, one (1) left posed bare hand, one (1) right posed Automail hand

From the anime "Fullmetal Alchemist: Brotherhood," 1/6 scale collectible figure Alphonse Elric is released! "FigZero 1/6 Alphonse Elric" is an articulated figure approximately 36.8cm tall. The figure partially uses fabric. The head piece is interchangeable between a standard head and a comical expression head, and the standard head has a LED light-up feature installed at the eyes. Other accessories include Xiao-Mei (Panda), Cat, 3 pairs of interchangeable hands which makes it possible to replicate various scenes in the anime.Also released at the same time and sold separately are "FigZero 1/6 Edward Elric", and also "FigZero 1/6 Edward Elric + Alphonse Elric Twin-Pack" which is a set of Ed and Al with special exclusive accessories added.Features:- 1/6th scale, approximately 36.8cm (14.5 inches) tall- Original body with over 25 points of articulation- Exquisitely detailed decals & paint applicationAccessories:- Xiao-Mei (Panda)- Cat- Small pouch- Loincloth- Two (2) pieces of interchangeable head parts: One (1) piece of standard head, One (1) piece of comical expression head- Three (3) pairs of interchangeable hands: One (1) pair of relaxed hands, one (1) pair of fists, one (1) pair of prayer handsLED Features:- Eyes of the standard headBatteries required (3x AG1, not included).

From the "ULTRAMAN SUIT ANOTHER UNIVERSE" project, the ULTRAMAN SUIT TIGA SKY TYPE variant joins the FigZero line! It dons a metallic violet color and includes ancillary gear originally designed by threezero!FigZero 1/6 ULTRAMAN SUIT TIGA SKY TYPE collectible is 1/6th scale, standing approximately 31.6cm (~12.4") tall, and is a fully-articulated figure with over 47 points of articulation. ULTRAMAN SUIT TIGA POWER TYPE has an exquisitely detailed paint application, and is constructed partially of die-cast zinc alloy with other metal parts. LED light-up features are installed in the eyes, at the Tiga Crystal on the forehead, and the Color Timer on the chest.The original ancillary gear designed especially for this figure are a pair of Leg Armor and Boosters, and a Thruster Backpack. Both gears are detachable from the main figure, and the Thruster Backpack has 4 panels that can open. Also, the Leg Boosters can be magnetically attached and detached from the Leg Armor.The figure also includes three pairs of interchangeable hands (one pair of fists, one pair of opened hands, and one pair for the Zeperion Beam shooting pose). Also included are two pairs of interchangeable Zeperion Beam Shooting Device cover parts for both open form and closed form for each forearm.FEATURES- 1/6th scale, approximately 31.6cm (12.4") tall- Original body with over 47 points of articulation- Exquisitely detailed paint application with original metallic violet colorway- Includes threezero original ancillary gear (A pair of Leg Armor and Boosters, and a Thuster Backpack)LED FEATURES- Eyes- Tiga Crystal on forehead- Color Timer on chestACCESSORIES- One (1) pair of detachable Leg Armor and Boosters- One (1) detachable Thruster Backpack (4 back panels can open)- Two (2) pairs of interchangeable forearm covers: One (1) pair of Zeperion Beam Shooting Device in closed form and one (1) pair in opened form- Three (3) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of opened hands, one (1) pair for Zeperion Beam shooting poseRequires AG1 batteries x 4 (Batteries Not Included).

From the popular manga series "BERSERK", threezero's new item is Griffith (Reborn Band of Falcon)!It is a 1/6th scale (approximately 30cm tall) articulated figure utilizing a customized body which has over 40 points of articulation. The figure is constructed of ABS, PVC and POM. The costume uses fabric to cover the movable joint of the armors. Threezero's notable detailed paint works are applied to highlight all the details, including the metallic paint works of the armors.The Griffith (Reborn Band of Falcon) collectible figure includes many interactive features to increase playability. It comes with total of 2 pieces of interchangeable head pieces: a head with the helm and without the helm (Both heads use the same single bare face piece). The visor of the helm is articulated and can be lifted up to reveal Griffith's face. The long hair of Griffith is made of soft PVC so that it will not get in the way of posing the figure. The detachable fabric cape has wires inside at the edges, making the cape poseable. The sword can be stored inside the sheath. It also comes with a total of 4 pairs of interchangeable hands.FEATURES- 1/6th scale, approximately 30cm tall - Customized body with 40 points of articulation- Highly detailed costume featuring fabric at the joint areas- Articulated helm visor- Long hair made of Soft PVCCOSTUME- 1x set of armors- 1x detachable cape with wires inside at the edgesACCESSORIES- 2x interchangeable heads: One (1) head with helm, one (1) head without helm (Both heads use the same single bare face piece)- 1x sword with sheath- 4x pairs of interchangeable hands: One (1) pair of relaxed hands, one (1) pair of pointing hands and two (2) pairs of different grips for holding sword

From the popular manga series "BERSERK", threezero's new item is Griffith (Reborn Band of Falcon)! Its Deluxe Edition is offered as a limited item, and it will be on preorders at various events worldwide.It is a 1/6th scale (approximately 30cm tall) articulated figure utilizing a customized body which has over 40 points of articulation. The figure is constructed of ABS, PVC and POM. The costume uses fabric to cover the movable joint of the armors. Threezero's notable detailed paint works are applied to highlight all the details, including the metallic paint works of the armors.The Griffith (Reborn Band of Falcon) collectible figure includes many interactive features to increase playability. It comes with total of 2 pieces of interchangeable head pieces: a head with the helm and without the helm (Both heads use the same single bare face piece). The visor of the helm is articulated and can be lifted up to reveal Griffith's face. The long hair of Griffith is made of soft PVC so that it will not get in the way of posing the figure. The detachable fabric cape has wires inside at the edges, making the cape poseable. The sword can be stored inside the sheath. It also comes with a total of 4 pairs of interchangeable hands.The Limited Edition exclusively comes with a 1/6th scale Crimson Beherit, and a diorama base. The Crimson Beherit necklace features a fabric necklace string. The diorama base is approximately 20cm wide, and the flag pole and the sword stabbed to the ground is detachable from the base. The flag is made of fabric with metal wires inside, players can flexibly adjust the flag to different shapes. Its pole is made of metal.FEATURES- 1/6th scale, approximately 30cm tall - Customized body with 40 points of articulation- Highly detailed costume featuring fabric at the joint areas- Articulated helm visor- Long hair made of Soft PVCCOSTUME- 1x set of armors- 1x detachable cape with wires inside at the edgesACCESSORIES- 2x interchangeable heads: One (1) head with helm, one (1) head without helm (Both heads use the same single bare face piece)- 1x sword with sheath- 4x pairs of interchangeable hands: One (1) pair of relaxed hands, one (1) pair of pointing hands and two (2) pairs of different grips for holding swordDELUXE EDITION EXCLUSIVE ACCESSORIES- 1x Crimson Beherit with fabric necklace string- 1x diorama base - 1x fabric flag with metal wires inside, accompanied by a metal pole that can be detached from the diorama base- 1x sword which is detachable from the diorama baseThis article is available throughout Europe exclusively from Heo.

From the "ULTRAMAN SUIT ANOTHER UNIVERSE" project, ULTRAMAN SUIT ZERO's variant "SC Mode" joins the FigZero line! This collectible figure dons a metallic red paint application replicating the color of the special coating used when entering the space-time boundary surface. It also includes special equipment originally designed by threezero!FigZero 1/6 ULTRAMAN SUIT ZERO SC Mode stands approximately 31.5cm (12.4") tall at 1/6th scale, and is a fully-articulated figure with 44 points of articulation. This collectible figure features a detailed paint application, and is constructed partially of die-cast zinc alloy and other metal parts for added durability. LED light-up features are installed at the eyes and the Color Timer at the chest.FigZero 1/6 ULTRAMAN SUIT ZERO SC Mode comes with a new original weapon, the "ZERO Scepter-Lance"! The "ZERO Scepter-Lance" can be separated to take the form of either the "ZERO Scepter" or the "ZERO Dagger". The blade of the "ZERO Dagger" can be attached to the upper or bottom end of the "ZERO Defender" shield of another figure, FigZero 1/6 ULTRAMAN SUIT ZERO LM Mode [3Z0511] (sold separately). Also, it comes with a pair of flame effect parts to attach to the fists. The figure also includes 4 pairs of interchangeable hands; 1 pair of fists, 1 pair of posed hands, 1 pair in knifehand strike pose, and 1 pair for holding weapons.FEATURES - 1/6th scale, approximately 31.5cm (12.4 inches) tall- Original body with 44 points of articulation- Exquisitely detailed paint application- LED light-up features at the eyes and at the Color Timer on the chest *- Includes threezero original equipment: One (1) "ZERO Scepter-Lance" (It can be separated to take the form of "ZERO Scepter" or the "ZERO Dagger")- The blade of the 'ZERO Dagger' can also be attached to the upper or bottom end of the "ZERO Defender" shield of another figure, FigZero 1/6 ULTRAMAN SUIT ZERO LM Mode [3Z0511] (sold seperately)ACCESSORIES - One (1) pc of ZERO Scepter-Lance- Four (4) pairs of interchangeable hands: one (1) pair of Fists, one (1) pair of posed hands, one (1) pair in Knifehand strike pose, one (1) pair for holding weapons LED FEATURES * - Eyes- Color Timer on ChestRequires AG1 batteries x 4 (Batteries Not Included).

From the phenomenal anime "Demon Slayer: Kimetsu no Yaiba", a series of 1/6th scale collectible figures has debuted as part of threezero's FigZero line! The first figure is the protagonist, Tanjiro Kamado! FigZero 1/6 Tanjiro Kamado is approximately 27.5 cm tall. It is a fully-articulated collectible figure with approximately 37 points of articulation. The materials used for the figure are mainly ABS, PVC, POM and fabric. The figure's attire includes the fabric-made Demon Slayer Corps uniform, and Tanjiro's iconic haori with an interior metal wire for poseabilityThe figure comes with three interchangeable facial expressions (one smile face, one serious face and one gag face) and six sets of interchangeable hands. Additional accessories include a metal Nichirin Sword, a knife and a plastic-made wooden box. Furthermore, a breath effect part (with magnet inside) and water breathing effect part are included to showcase Tanjiro's dynamic swordsmanship.Specifications:FEATURES:- 1/6th scale, approximately 27.5 cm tall - Approximately 37 points of articulationCOSTUME:- One (1) Demon Slayer Corps uniform made of fabric- One (1) haori made of fabric- One (1) pair of shin guards- One (1) belt- One (1) pair of zori- One (1) pair of tabi socksACCESSORIES:- Three (3) interchangeable faces: One (1) simile face, One (1) serious face (with magnet inside to attach breath effect piece), and one (1) gag face- Six (6) sets of interchangeable hands: One (1) pair of fists, One (1) pair of relaxed hands, One (1) pair of open hands, one (1) pair of griping hand, one right shakehand grip hand and one (1) left holding sheath hand- One (1) Nichirin Sword made of metal and its sheath- One (1) knife- One (1) openable wooden box made of plastic- One (1) Water Breathing effect part for attaching to the Nichirin Sword- One breath effect (with magnet inside) to attach to the serious face

To celebrate the 70th Anniversary of GODZILLA (1954) and the 50th Anniversary of GODZILLA VS. MECHAGODZILLA (1974), threezero is proud to announce the KAIJU-DOU Godzilla (1974)! The figure stands approximately 9 inches (22.9 cm) tall and is made with a die-cast zinc alloy and engineering-grade plastics internal frame system. A single piece of outer "skin" seamlessly covers the frame system. It is exceptionally posable, with approximately 26 points of articulation, including adjustable mouth, and a fully articulated tail. Its precise and incredible details are sculpted by Takeshi Oka, faithfully replicating Godzilla's appearance as seen in the film.KAIJU-DOU Godzilla (1974) has many special features to enhance playability. Pressing the button hidden underneath the chest area triggers Godzilla's iconic roar sound, and the LED-illuminated dorsal plates will light up when pressing another hidden button. These two features require three AG3 batteries to operate (batteries not included). The Heat Ray effect accessory, which can be placed in Godzilla's mouth, faithfully replicating his signature attack move.Additionally, KAIJU-DOU Godzilla (1974) includes two broken transmission towers, which can be placed in front of his chest, mimicking the classic scene where the transmission towers attach to his body using magnetic force after absorbing lightning energy. Also included are three sets of interchangeable hands, which allow for a wide range of display and posing options!FEATURES:- Approximately 9 inches (~22.9cm) tall- Seamless "skin" covering an internal frame system- Godzilla's Iconic Roar Sound Effect- LED Illuminate Dorsal Plates light up*- Detailed and weathered paint application- 26 Points of articulation including adjustable mouth and fully articulated tail- Sculpted by Takeshi Oka ACCESSORIES- 2 x Transmission Towers- 1 x Heat Ray Effect- 3 x sets of interchangeable hands: one (1) pair of fists, one (1) pair of action hands (assembled), one (1) pair of relaxed handsLED FEATURES*Dorsal Plates*Requires AG3 batteries x 3, batteries not includedMaterials: ABS, PVC, POM, die-cast zinc alloy, fabric

From the anime film "Evangelion: New Theatrical Edition," Evangelion 13 joins threezero's ROBO-DOU collectible figure series! ROBO-DOU Evangelion 13 collectible is a non-scale articulated figure approximately 28 cm (11.02") tall (including the shoulder pylons) with a remarkable die-cast main frame that provides approximately 50 points of articulation. The figure is constructed of ABS, PVC, POM, and zinc alloy, and utilizes threezero's renown paint application technique to highlight all the mechanical details.The ROBO-DOU Evangelion Production 13 collectible figure includes many interactive features to increase playability. The figure comes with two interchangeable heads: a standard head and a head with red eyes. There are two interchangeable chest plates and an additional pair of arms, allowing for different display options to showcase Evangelion 13 with either two arms or four arms. A pair of RS Hoppers' housing block can be attached to the shoulder pylons. It also comes with two interchangeable back armor plates, offering a choice between a standard back armor plate and an articulated back armor plate designed specifically for attaching the four pieces of RS Hoppers in a floating state. Each RS Hopper can be equipped with attack mode effect piece or AT Field effect piece. Two Spear of Longinus are also included, which makes it possible to recreate a scene from the film. Other accessories are a total of ten pairs of interchangeable hands, with five pairs for the original arms and five pairs for the additional arms, featuring options including spears-holding hands, fists, action hands, relaxed hands, and a wide opened hand. The figure also comes with a ROBO-DOU action stand to support various poses.FEATURES:- Approximately 28 cm (11.02") tall including the shoulder pylons- Approximately 50 points of articulation- Die-cast zinc alloy frameACCESSORIES:- Two (2) pcs of interchangeable heads: one (1) standard head and one (1) with red eyes- Two (2) pcs of interchangeable chest plates: one (1) in a dual-arm state and one (1) in a four-arm state- One (1) pair of additional arms- One (1) pair of RS Hoppers' housing blocks that can be installed on shoulder pylons- Two (2) pcs of interchangeable back armor plates: one (1) standard back armor plate and one (1) back armor plate designed specifically for attaching the 4 pieces of RS Hoppers in a floating state- Four (4) pcs of RS Hoppers- Four (4) pcs of attack mode effect parts for the RS Hoppers- Four (4) pcs of AT Field effect parts for the RS Hoppers- Two (2) pcs of Spear of Longinus- Ten (10) pairs of interchangeable hands:- Five (5) pairs for the original arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- Five (5) pairs for the additional arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- One (1) pc of ROBO-DOU action stand- One (1) pc of connection part between ROBO-DOU Evangelion 13 and ROBO-DOU action stand